Jul 09
18

SAP ecc 6.0 ides installation screen shots with 10 DVDs

472 Comments

You can install sap ECC (ERP Central Component) 6.0 ides  in a desktop or notebook to practice on most of the sap functional modules as well as BASIS and ABAP technical components. I have installed ECC 6.0 IDES on my computer and took all the screen shots while installation. After windows server installation, these screen shots will help you to configure windows server for sap installation, Java installation and oracle installation and starting installation master to start sap installation. After this installation you can use the installed SAP system to practice sap modules like MM, SD, PP, FICO, HR, BASIS and ABAP. This software dump or installation should be used only for self practice. This software will work only for 4 weeks from the date of installation. So you have to set the system date to future dare before starting the actual installation. You can bring the future date back to current date after completion of the installation. This trick will help you to practice sap modules up to the future date + 4 weeks without any licensing problems.

Recommended hardware requirements to install SAP ecc 6.0 ides sr2 in a personal computer or laptop:

  • 250GB + 45GB Hard Disk Space – 250 GB is for actual ides installation and 45 GB is to store software dump which is required for installation, you can remove this dump after completion of the installation
  • Recommended RAM is 4 GB (Minimum 2GB RAM)
  • Intel dual core or core 2 duo processor, you may have high speed processors like AMD or 64 bit Intel processors ( I recommend ECC 6.0 EHP4 instead of ECC 6.0 SR2 for the people who has 64 bit processors). You should dedicate 500GB HDD in this case.
  • DVD Drive to copy all the DVDs into software dump drive
  • Good power backup (UPS), you have to do this installation from scratch if power goes in between

Recommended software requirements:

  • Windows server 2003 32 bit with Service pack 2 for installing SAP ECC 6.0 SR2 IDES or Windows Sever 2003 64 bit operating system for installing SAP ECC 6.0 EHP4 IDES
  • You should have mother board or Laptop driver CD
  • Office 2003 or later to open the installation screen shots

SAP ecc 6.0 ides sr2 or ehp4 installation will be completed approximately in 20 hours with the above configuration. Please contact me, if you need ecc 6.0 sr2 or ehp4 installation screen shots document. This installation screen shots document will help you to install sap ecc 6.0 on your computer when you have the software dump with you. You can Contact me for the ftp access to download the software dump along with the installation screen shots for nominal charges.

I am also providing remote installation service for this software. You have to be ready with all the hardware and software requirements. We can use team viewer to complete the installation. I will show you how to install sap ecc 6.0 on your computer online, so that you can learn how to install sap ecc 6.0.

Tags: , , , , , , , , , , , ,

This entry was posted on July 18, 2009 at 6:04 AM. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Posted in SAP Installation by Raj 472 Comments

472 Responses to "SAP ecc 6.0 ides installation screen shots with 10 DVDs"

  • MSR says:
    April 14, 2012 at 3:59 AM
    Reply

    Hi-
    Bought a Lenovo laptop 8 gb RAM & 500 GB HDD with I5 processor and also windows 7 professional with 64 bit.

    Based on the discussion forum that I observed that we can not install SAP ECC 6.0 directly in the laptop..we need to have Windows server 2003/2008 to install directly…My question over here is how do I get install SAP ECC 6.0 with BI on my laptop

    Appreciate if Could you provide details for the above and also Is there a possible that you can do remote installation in my laptop and also want to know the price of how much do you charge for SAP ECC 6.0 with BI DVD’s and remote installation.

    Please do reply @ msrsudhan@gmail.com with all required info.

    Txs,
    MSR

  • MSR says:
    April 14, 2012 at 3:56 AM
    Reply

    Bought a Lenovo laptop 8 gb RAM & 500 GB HDD with I5 processor and also windows 7 professional with 64 bit.

    Based on the discussion forum that I observed that we can not install SAP ECC 6.0 directly in the laptop..we need to have Windows server 2003/2008 to install directly…My question over here is how do I get install SAP ECC 6.0 with BI on my laptop

    Appreciate if Could you provide details for the above and also Is there a possible that you can do remote installation in my laptop.

    Txs,
    MSR

  • Ab says:
    April 10, 2012 at 6:05 AM
    Reply

    Hi Raj,

    Do u sell Pre installed SAP ECC 6 SR 2, its Restore DVDs (not installation DVDs pls), FICO training material, videos and others? Pls treat as very urgent. You contact me on my email: seyiabimbola@yahoo.com. Thanks

  • srinivas says:
    April 7, 2012 at 11:11 AM
    Reply

    Hello !

    I am Interested in buying SAPECC6 EHP4 only . Please email me the details at srinivasmgrao@gmail.com

    Thanks !

  • SM says:
    March 18, 2012 at 8:12 PM
    Reply

    Hi Raj,

    Could you please mail me the price of different options as well the services rendered by your team?

    Please mail me soup_mitra2k@yahoo.com

    Best wishes,
    Supriyo

  • Rakesh says:
    March 1, 2012 at 11:48 AM
    Reply

    Hi Raj,

    I am in Delhi. I have got a laptop with configuration
    Intel I5 2nd Genreation
    4 GB Ram
    500 GB HDD
    OS Windows 7 Ultimate
    I would like to install SAP ECC 6.0 SR2/SR3 on external hard disk(500GB).Please send me details(Commercial & Technical) how can I get it installed.
    My mail ID is rakeshkun29@yahoo.co.jp

    Waiting for your reply.

    Regards,

  • Abby says:
    February 26, 2012 at 8:01 PM
    Reply

    Hi Raj,
    I came to following error while installing SAP ECC 6.0 as follows:

    ERROR 2012-02-25 20:43:39
    CJS-00091 Unable to create the tablespaces.DIAGNOSIS: There is not enough free disk space: Mount point | space required | space available | SAPDATA directories C:/ | 221012 | 31221.6 | 1,4.SOLUTION: Make more disk space available.

    ERROR 2012-02-25 20:43:39
    MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.

    ERROR 2012-02-25 20:43:39
    FCO-00011 The step checkFreeDiskSpace with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraTablespace2|ind|ind|ind|ind|6|0|checkFreeDiskSpace was executed with status ERROR .

    I was trying to install it on Laptop.My laptop configuration
    4 GB RAM
    640 GB HDISK
    i5

    There is enough space on my hard disk but it is giving the same error.
    Will you help me out in solving this problem

    Regards
    Abby

  • Bob says:
    February 23, 2012 at 9:54 PM
    Reply

    I want to purchase sap ecc 6 with the installation guide, I hope it wont be a problem posting it to the UK

  • Manish Sharma says:
    February 22, 2012 at 5:52 PM
    Reply

    hi, can we install the SAP ECC6.0 IDES on windows 7, with out using vmware…??

    if yes then please let me know few steps because i am trying to install it , it ask for the Oracle Dtabase, even after installation of Oracle, then what to do,???

    if we can install by vmware only then how can we please let me know…??

  • rajeev says:
    February 9, 2012 at 9:40 PM
    Reply

    i want to purchase sap ecc 6 ehp5 plz tell me price with discount

  • Jhun says:
    February 1, 2012 at 11:13 AM
    Reply

    hi Raj,

    I’m interested with your service. I wanna know how much the SAP R3 IDES 10 dvd’s with screenshots along with your service? and how long it will take to received the materials? I’m from manila, Philippines

    you can email me at dionisio.demoral@synersysph.com

  • islah says:
    January 27, 2012 at 12:41 PM
    Reply

    HI
    Looking for practice of FI / CO, which module do I need and what will be the prices. please send me information

  • Mahesh says:
    January 24, 2012 at 4:57 PM
    Reply

    I have to install ECC 6.0, Technical CRM,SAP BW& BI.I don’t know the configuration could you please…..It’s very urgent

  • srikath says:
    January 7, 2012 at 12:21 AM
    Reply

    hi raj ..

    first of all i wana say thanks to you for giving more
    clarity on sap.2 days back i had taken dell laptop 15r inspiron n5110 with pre installed windows 7 home basic with 6 gb ram and 500gb hard disk, my question is that, if i install ecc6 ehp5 in my laptop by using virtual machine is it work properly.as of my feed back is sap working slowly, please suggest me how can i install sap in my windows 7 hb with out loosing my pre installed win7.ofter installation is it work speed application.are i have to change the os .

    srikanth.B

    • helyes says:
      January 7, 2012 at 4:21 AM
      Reply

      Hi Do you have a procedure in order to install ECC6 SR2 i bought the installation but the procedure is not complete , thanks

      • Raj says:
        January 8, 2012 at 12:47 PM
        Reply

        Hi

        I have the step-by-step installation screen shots to install ECC 6.0 SR2 on a desktop or laptop. I can provide this document just for 25USD. You should have proper software to finish the installation without any errors. Please check the software for missing files. Please get back to me if you are interested to get the document.

        Thanks
        Raj

  • helyes says:
    January 6, 2012 at 6:35 AM
    Reply

    Hi

    I just bought the installation of ecc 6.0 sr2 but i have error message when i want to load the export , in fact the Label ASC is not recognize by the install, i am installing with windows server 2003 and oracle 10,2

    Please help me or send me a procedure step by step.

  • Ankur says:
    January 4, 2012 at 9:49 PM
    Reply

    Hi raj,

    My Compaq notebook configuration is Windows 7 (Home Basic), 2 GB RAM, I terabyte External Hard Disk, 64 bit operating system.

    Could you please let me know which one will be right choice for me among ECC 6.0 IDES and ECC 6.0 EHP4. ?

    Does the hardware specifications I have written above is appropriate?

    Do let me know if you want to know anything else?

    Also I want to buy ECC 6.0 for my Notebook.

    You can reach me either at my email id—- engg.annkur@gmail.com or call 07428758555.

    Thanks
    Ankur

  • hamid says:
    December 28, 2011 at 9:21 PM
    Reply

    Hi,

    I need SAP ECC 6.0 installation Dvds, how much it cost for hyderabad. What other things are included with these dvds

    Regards
    Hamid

  • Sergio says:
    December 16, 2011 at 4:17 PM
    Reply

    Raj, I have some question to you:
    1) My system is Windows 7 64 bits … it is ok?
    2) How I can transfer money to you? I’m living in Brazil.
    3) When I receve the DVD (if ok), will you access my note (remotelly) to put the SAP ready?
    4) If I have some questions or need support inte the future will you give support? How I can pay you?

    Thanks
    Sergio

  • saminenistalin says:
    November 17, 2011 at 9:53 AM
    Reply

    i want to install sap ecc 6.0 ides plese provide instructions to me

    • Raj says:
      November 25, 2011 at 9:44 PM
      Reply

      Hi saminenistalin

      I can provide installation screen shots document to install SAP ecc 6.0 sr2 on windows server 2003 for 25USD. Please get back to me if you are interested to buy.

      Thanks
      Raj

  • khaleel says:
    November 16, 2011 at 11:31 PM
    Reply

    sir
    i have laptop. i having 250 HDD and 2GB ram so do i install ecc 6.0 and i want to install sap bsis so i want to it is intall in this configuration .
    so please suggest me

    thank you

    • Raj says:
      November 25, 2011 at 9:48 PM
      Reply

      Hi Khaleel.

      You can copy sap 4.7 ides vmware image file to your hard disk and run the software with 2GB ram. My suggestion is to upgrade RAM to 4GB for better performance of the SAP R/3 system. It will work very slow just with 2GB RAM on whole. If you have 4GB, you can allocate 2GB for host operating system and 2GB for virtual machine. Then both host and guest operating systems will work fine.

      Thanks
      Raj

  • Aman Deep says:
    November 8, 2011 at 7:16 PM
    Reply

    Hi any one help to get free sap 6.0 or 4.0 ecc software
    it urgent please help me
    as soon as u can

    IF any what to know How install u can mail me
    amanlove23@gmail.com or aman_in12@yahoo.co.in

  • deepak mathur says:
    November 5, 2011 at 10:08 AM
    Reply

    Do you have SAP -HANA,please let me know if you have i am ready to install in my PC

  • CM.RAJBHARATH says:
    October 31, 2011 at 4:04 PM
    Reply

    Hello good evening Sir / Madam i had completed my SAP BASIS Course and i know how to install the IDES 4.7 & ECC 6.0 version, am searching for the job on SAP BASIS so will you please help me out for this, and presently am working at A.P.C.P.D.C.L its an Power Department (On Contract Basis). My Mobile number : 9959614630.

    Regards.

    Rajbharath.CM

  • naveen says:
    October 27, 2011 at 1:45 PM
    Reply

    hi, i have 10+years of exp.. in civil construction field, am interested to learn SAP, which module is suitable for me , please give a suggestion r send a mail: af_kal@yahoo.co.in

  • thadevat says:
    October 20, 2011 at 2:08 PM
    Reply

    Hi Raj

    I have successfully installed IDES but there is only little master data. This is not in sync with the data used in SAP training materials.

    I have read some people use ECATT to load this data in, can you please advise how can I achieve this data loading on the system.
    I am willing to compensate you for the advise.

    Regards
    thadevat

  • Paddy says:
    October 14, 2011 at 4:10 AM
    Reply

    Hi Raj

    How much is this and how do I pay ?

    Thanks

    Paddy

  • Himanshu Goplani says:
    October 14, 2011 at 12:31 AM
    Reply

    Hi, can you please mail those screenshots.My email id dishhims@gmail.com

  • Ano says:
    October 11, 2011 at 10:01 AM
    Reply

    Hi Raj,

    I’m interested to setup my own SAP IDES.

    Please send me the pricing of your installation guides and SAP IDES installation CDs.

    Thanks!

  • jesus cantu says:
    October 5, 2011 at 1:30 AM
    Reply

    send me information were can i get or buy sap 6 ides

  • R.Ragunath says:
    September 29, 2011 at 5:06 PM
    Reply

    Sir

    i have installed ecc6.00 in my desk top but in GL i am unable to configure can you give me the steps in this regard

  • Ale says:
    September 25, 2011 at 10:19 PM
    Reply

    Dear Raj

    Good day!

    SAP Installation Errors

    I was trying to install SAP ECC 6.0 SR2 IDES
    Started as per the instruction available in the screen shot file and also compared those with instructions on your site
    My Hardware is as per the recommended requirement
    Intel Core 2 duo Processor
    4 GB RAM
    500 GB Sata HDd partitioned in 3
    I. For OS 60 GB
    II. For SAP 280 GB
    III. For SAP Dumps 130 GB
    I have
    1. Installed Windows 2003 Server Ent Edtn With SP2 and all latest updates
    2. Copied all the Installation DVDs in a folder on E:\SAP INST Dumps (there were some fiels couldn’t be able to copied)
    3. Installed JAVA
    4. Added Loopback Network Card
    5. Change the page files as pre recommendations
    6. System Name kept as provided by solution Manager
    7. Installed oracle 10g
    8. Got the oracle installation conformation window
    9. Install the patched
    10. Then selected SAP Installations parameters/settings
    11. Given proper Path
    12. Installation started
    13. Immediately asked for Key provided that
    14. Then installation process continues
    15. But at the SAP installation process stage 17/45 We got the following errors (SAP installation started around 5.45 PM and this errors are at around 10. PM
    ERROR 2022-09-22 09:47:57
    CJSlibModule::writeError_impl()
    CJS-30022 Program ‘Migration Monitor’ exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.

    And the content of the “import_monitor.java.log” is as below

    java version “1.4.2_12″
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    Import Monitor jobs: running 1, waiting 3, completed 15, failed 0, total 19.
    Import Monitor jobs: running 2, waiting 2, completed 15, failed 0, total 19.
    Import Monitor jobs: running 3, waiting 1, completed 15, failed 0, total 19.
    Loading of ‘SAPSLEXC’ import package: ERROR
    Import Monitor jobs: running 2, waiting 1, completed 15, failed 1, total 19.
    Loading of ‘SAPSSEXC’ import package: ERROR
    Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
    Loading of ‘SAPAPPL1′ import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 15, failed 3, total 19.

    And “import monitor.log” file
    The content of this file is big but in the end of the file lines specific to errors I have copied here

    ERROR: 2022-09-22 09:46:58 com.sap.inst.migmon.LoadTask run
    Loading of ‘SAPSSEXC’ import package is interrupted with R3load error.
    Process ‘D:\usr\sap\SAI\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error’ exited with return code 2.
    For mode details see ‘SAPSSEXC.log’ file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

    ERROR: 2022-09-22 09:47:50 com.sap.inst.migmon.LoadTask run
    Loading of ‘SAPAPPL1′ import package is interrupted with R3load error.
    Process ‘D:\usr\sap\SAI\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error’ exited with return code 2.
    For mode details see ‘SAPAPPL1.log’ file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

    WARNING: 2022-09-22 09:47:57
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.

    WARNING: 2022-09-22 09:47:57
    3 error(s) during processing of packages.

    INFO: 2022-09-22 09:47:57
    Import Monitor is stopped.

    So sir if you can let me know what could be the possible cause of this errors and termination of the installation process is it due to the those files I couldn’t be able to copied from DVDs
    1. The Installation software DVDs I have got is 9 DVDs not 10
    2. The following files in the DVD2.DVD3, DVD4 and DVD7 are not able to copy to local hardisk folder SAP INST DUMPS gives CRC erros
    1.IN DVD-2 Total 1-BAd File
    and could not able to copy which is below
    Path on the DVD
    \export2\EXP2\DATA
    1.SAPAPPL1.006 —1024,000 KB Type 006 File
    Data Error (CRC)

    2.In DVD-3 Total 2-BAd Files
    and could not able to copy which are below
    Path in the DVD
    \export3\EXP3\DATA
    1. SAPAPPL1.010 —932,269 KB Type 010 File
    2.SAPSLEXC.001 —227,834 KB Type 001 File
    Data Error (CRC)

    3. In DVD-4 Total 1-BAd File
    and could not able to copy which are below
    Path in the DVD
    \export4\EXP4\DATA
    SAPSSEXC.001 —1024,000 KB Type 001 File
    Data Error (CRC)

    4.IN DVD-7 Total 1 Bad File
    and could not able to copy which are below

    Path in the DVD
    \JAVACOMP\JAVA_EXPORT\SDM

    SDMKIT.JAR — 756,901 KB Executable Jar File
    Data Error (CRC)

    let me know is it the proper ECC 6.0 SR2? or its lower version because total DVDs are 9 not 10

    And Sir how can we get these missing /corrupt files? because the person from whom we bought this is not responding any more and our money is gone

    So would highly appreciate if you can help me to get only these corrupt files

    Thanks and Regards

    Ale Khan

  • Naveen says:
    September 23, 2011 at 5:02 PM
    Reply

    Hey Raj…
    i wanna get these dvds please contact me nvn1986@gmail.com

    my laptop configuration is sahara al096, hdd 120gb,ram 2gb ddr2, core duo 1.73 ghz. can i upgrade it to 500gb internal hdd. please inform

  • Ale says:
    September 22, 2011 at 10:39 AM
    Reply

    Dear Raj

    Hi!

    I am trying to install the SAP ECC 6.0 IDES at the stage 17/45 it aborting witht he below errors any idea what and where couldbe the problem

    ERROR 2022-09-22 09:47:57
    CJS-30022 Program ‘Migration Monitor’ exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.

    ERROR 2022-09-22 09:47:57
    FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .

    Would highly apreciate if you cna guide or suggest on this How to resolve this

    With Warm Regards

    Ale

  • naresh says:
    September 22, 2011 at 12:19 AM
    Reply

    hi Raj
    I want to install ECC6.0 in external hard disk i’m interested to purchase dvd’s please send me the details to my mail id konetinareshkumar@gmail.com

  • Thadevat says:
    September 21, 2011 at 1:19 PM
    Reply

    Hi Before requesting screenshots I want to prepare by having all the files ready.
    When I go to service market place to download these software components it adds to the download basket of the download manager but I’m not able to download it. Can this only be download with Solution manager? But isnt solution manager a part of ECC 6.0 installation? So how to download the package without using solution manager in the first place?

    I want to download the IDES package for IS – Retail.

    Can you please advise.
    Regards
    thadevat

  • dave says:
    September 20, 2011 at 11:00 AM
    Reply

    I am looking for SAP ArchiveLink database (MaxDB) to be linked to SAP ECC 6.

    It needs to be on a separate VM than the ECC 6.

    Or if you have OpenText Livelink server, it will be better.

  • BUMBA says:
    September 17, 2011 at 1:53 PM
    Reply

    Hai Raj,
    I Want to know how to install ECC 4.7 or 6.0, the procedure of install step by step… can u help me…

  • snehal says:
    September 15, 2011 at 9:03 AM
    Reply

    dear friends,

    I have download sap ecc ides eh5 from server portal .i have extracted installation master but it does not show option for central instance .

  • Manish Sharma says:
    September 14, 2011 at 6:44 PM
    Reply

    Hello Raj

    I am interested to buy ERP ECC6.0 software….

    How much i have to pay for this and how i can purchase?

    my mail ID: manisharma7782@gmail.com

  • Shailendra says:
    September 14, 2011 at 4:13 PM
    Reply

    Hi Raj,

    I want to install SAP ECC 6.0 Eph4 on my laptop and want to make multiple users. Can you provide me the CD’s and the steps to complete the installation please?

    Regards,

    Shailendra

  • SAHIL says:
    September 13, 2011 at 9:34 AM
    Reply

    Hi Raj,
    Can you plz send me the step by step procedure of SAP installation to my mail id.
    Thanks a lot.

  • Carl says:
    September 11, 2011 at 3:26 AM
    Reply

    Hi,

    I need the BI 7 installation screenshot. I use win server 2003 64bit.

    thanks and best reards
    Carl

    • Raj says:
      September 14, 2011 at 8:12 PM
      Reply

      I can provide you the installation screen shots to install BI 7.0 on windows server 2003 64bit for the price of 1000INR or 25USD. Please get back to me if you are interested to buy. Thanks Raj

  • Rohit says:
    September 8, 2011 at 6:49 AM
    Reply

    My Laptop Configuration is
    3GB RAM ,500GB HD , Core i3Processor and Win 7. I have installed on VMware. But when i am using i am not getting the proper speed/performance. Will increasing the RAM help me.

  • PALLAB SANTRA says:
    September 7, 2011 at 12:33 PM
    Reply

    Need SAP ecc 6.0 ides installation screen shots & DVD.

  • Paddy says:
    September 6, 2011 at 12:19 AM
    Reply

    Hi Raj

    Can you let me know the cost of your DVD’s and instructions. I will need the 32bit version.

    Ta

    Paddy

  • Keith says:
    September 5, 2011 at 4:34 PM
    Reply

    Hi Raj, Can you supply me with a set of discs for ECC 6.0 EHP4
    I want to install in VMware.
    Do you supply installation instructions.
    If I get stuck, I will then request your assistance.
    What is the price for the discs & also for your assistance?

    Thanks
    Keith

  • Kumar says:
    September 4, 2011 at 10:39 PM
    Reply

    Hi Raj,

    This is Kumar, I need some information regarding SAP software I.e. How much hard ware capacity is required to load the latest SAP software in laptop and is it possible to load SAP in apple mac book

    • Raj says:
      September 5, 2011 at 7:29 PM
      Reply

      Hi Kumar,

      I do not know about mac operating system. The recommended minimum hardware requirements to install latest SAP software is 4GB RAM and 500GB HDD.

      Thanks
      Raj

  • Anitya says:
    August 28, 2011 at 5:10 PM
    Reply

    I want to install sap ecc 6.0 on my laptop (4GB RAM,320 HD). Let me know about the price and about its license.

  • Sudhakar says:
    August 27, 2011 at 7:17 PM
    Reply

    Hi Raj,

    I have a HP DV6 6121tx with i7, 4gb Ram and 640 GB hard drive.. I am learning BI and ABAP and wanted to install both BI & SAP Ecc 6.0 EHP4. The training institute provides free installation but when i took my laptop in, they said that BI does not work properly in HP laptops. Is this true ? Can you help me with the installation ?

  • vijay says:
    August 23, 2011 at 1:27 AM
    Reply

    I want to install SAP ECC 6.0 on my 64 bit laptop. please let me know ho we can go about it, thank you.

  • adam says:
    August 22, 2011 at 7:59 PM
    Reply

    Hi,
    Raj I’m interesting with get your help to install ECC 6.0
    How can I install ECC on my computer? I have installed Windows Serwer 2003, but i can’t install ECC because my java is installed with wrong version

  • adam says:
    August 22, 2011 at 7:54 PM
    Reply

    raj it’s only test

  • gopinath says:
    August 21, 2011 at 11:13 PM
    Reply

    hi raj,
    i am interested to purchase the software SAP IDES6.0
    please send the details to my mail.

  • Subhash Carpenter says:
    August 19, 2011 at 8:44 PM
    Reply

    I want to install SAP IDES ECC 6.0…..can we do it tommorow on team viewer….please

  • irfan says:
    August 9, 2011 at 2:57 PM
    Reply

    Hi Raj,

    I want to learn and ambitious to become a SAP SD & MM consultant. Kindly advise the good material to buy and how you will send the DVDs to me as i am in saudi arabia. I can be reached on my email:- irfanbinsaleem@yahoo.com

    Regards,

    Irfan

  • patrick says:
    August 8, 2011 at 1:31 AM
    Reply

    please i want to install sap ides 6.0 but my system doesnt meet the requirements. Can i install it on an external hard disk? And please how can i go about this(installing on an external HDD). Thanks

  • cyril says:
    August 5, 2011 at 11:32 PM
    Reply

    dear Raj,

    Why do we need three servers dev, qas, prd for sap ecc 6.0 version installation is it necessary how does it help. Is there any documentation highlighting the pros and cons so that i can find answers in detail.

    kind regards

    • Raj says:
      August 6, 2011 at 12:49 PM
      Reply

      You need 3 sap systems to understand the concept of transport management systems. Customization work can be transported from one system to system with the help of TMS. Thanks Raj

  • zee says:
    August 5, 2011 at 11:16 PM
    Reply

    Hi Raj,

    I am intrested to buy screen shots and dvd’s for ecc 6.0, but I have few questions.
    I am using 64 bit supported laptop. Oracle 10g which is the databse of ecc 6.0 has different version for 64 bit os, does ecc 6.0 also have different version for 64 bit os? and do you have dvd’s for ecc 6.0 64 bit?

    My email address is zaheerabbas7@hotmail.com, kinly reply me and let me know about it…

    • Raj says:
      August 6, 2011 at 1:10 PM
      Reply

      Hi

      Oracle is different for 32bit and 64bit platforms. Oracle software for all platforms will be included in the SAP kit. ECC Exports are same for 32bit and 64bit. You should have different Installation master, kernel, oracle client for each platform. In your case, as your laptop is 64bit compatible, I suggest you to install ECC 6.0 EHP4 software for practice. If you need more information please get back to me.

      Thanks
      Raj

  • Naren says:
    August 5, 2011 at 8:15 PM
    Reply

    hi, nice to hear from you how can i get the software i want to do fico and mm am using win 7 in my laptop can i install in 1tb external drive will it wrk out properly kindly suggest

    • Raj says:
      August 6, 2011 at 1:16 PM
      Reply

      Hi Naren, You can install the software in an external drive using the power of VMware software. The installation time will be very high if you install the software directly on an external drive. So, you install the software in a physical machine without using VMware first. After successful completion of the installation, you can import the physical machine into a Vmware workstation. The .vmdk file will be created in the Vmware configuration folder. You can copy .vmdk file to an external drive and configure Vmware to use the file. This file can be used any number times and in any computer. Regarding software please contact me through mail punarvasi@gmail.com

      I am also providing online SAP basis one-to-one interactive training. Please inform any of your friends who is interested in learning SAP basis course.

      Thanks
      Raj

  • Balamurugan says:
    August 5, 2011 at 3:23 PM
    Reply

    Hi Raj

    Can you plz send me the step by step procedure to my mail id
    vpbalamurugan@rediffmail.com
    Thank you.

    • Raj says:
      August 5, 2011 at 3:27 PM
      Reply

      I am providing installation screen shots for 1000Rs. or 25USD. I have captured all the screen shots to install ecc 6.0 sr2 on a desktop or laptop. Anyone can install the software on their PC or Laptop by following the installation screen shots. Minimum computer knowledge is required to use this file. You should know how to install windows server operating system to proceed with the installation of SAP system. Please get back to me if you are interested to buy the document. Thanks Raj

      • Josh says:
        August 7, 2011 at 12:43 PM
        Reply

        Hi Raj, i will like to install ecc on my external hard drive.
        Please how do i make the payment to you so you can provide me with the video screen shot..

        • Raj says:
          August 7, 2011 at 4:20 PM
          Reply

          Hi Josh, Install ECC software in a physical computer and import the physical computer into a VMware virtual machine. After successful import of the .vmdk file, copy the file to an external drive. Then you can use External drive in any computer with 4GB or More RAM can Run SAP easily. The performance also will be good if you do like this. You can send the payment to my paypal account punarvasi@gmail.com I will provide installation screen shots after payment.

          Thanks
          Raj

  • Ejaz Ali says:
    August 5, 2011 at 12:44 PM
    Reply

    Dear Raj
    Could you please let me know the details, in order for me to procure SAP ECC 6.0, along with the right version of Windows Server ?
    I would install it in my laptop, with external HDD. Do you think I have to compromise on speed in that case
    mail me at.

    hr.tourist@gmail.com
    skype faraz.ahmed1911

    Ejaz

    • Raj says:
      August 5, 2011 at 2:21 PM
      Reply

      I have given reply to your mail id. Raj

      • Vinay says:
        August 21, 2011 at 4:53 PM
        Reply

        Hi Raj,

        I am interested in practising MM module and I have ECC v6.0 SR3 IDES.. Can u plz let me know if this is the right software.. The issue is I have Windows 7 and also would like to install it on external HD..So could you plz let me know how to get in touch with u..My mail id is: vinayk83@gmail.com
        Thank you..

  • Ejaz Ali says:
    August 5, 2011 at 12:06 PM
    Reply

    I am intrested in installing ECC 6.0 kindly do let me know that from where i can get DVD’s and at what price.

  • zee says:
    August 5, 2011 at 1:48 AM
    Reply

    can we install sap ecc 6.0 on windows 2008 server or windows 7 enterprise version

  • jeeth says:
    August 4, 2011 at 10:10 PM
    Reply

    Hi Raj

    I am looking into installing ecc 6.0. Where can I get the dvd’s.
    Can have your help for installation

    jeet

  • nivas says:
    August 3, 2011 at 4:00 AM
    Reply

    Hi raj i would like to know where should kernal(windows version 64bit) software to install ECC 6.0 is it possible to get online. plz let me know.

    Thanks

    nivas

  • Ramesh says:
    August 3, 2011 at 12:02 AM
    Reply

    Hi, I require SAP ECC 6.0 version DVD’s and the installation Procedure for installing in my Laptops.
    Can you please help me in send the price of the DVD’s and Installation Procedure.

    Thanks & Regards,
    Ramesh

  • Paawan says:
    August 2, 2011 at 2:01 PM
    Reply

    Hi,
    I need help in installing SAP IDES. I want to know if you offer online training in BASIS?

    Regards

    Paawan

  • Anil says:
    August 1, 2011 at 10:42 PM
    Reply

    Hi Raj,

    My Laptop Configuration is
    3GB RAM ,500GB HD , Intel Core 2 Duo T5500 and Win 7.

    I am Doing BI and BO Course ..
    Do I need to install whole SAP ECC in my laptop ? or Do Just SAP BI and BO is enough?

    Please suggest me about this..

    Thanks In Advance

    @

  • A Alam says:
    July 30, 2011 at 6:20 AM
    Reply

    Dear Raj

    Good Morning

    This is A Alam
    I am intrested and would like to know and have the step wise procedure to install SAP ECC 6.0 on Windows Server Paltform
    Also if possible how to setup clients and other different configuration
    Thanks in Advance with Regards

    my email add is aalampus@yahoo.com

    A Alam

  • ramesh says:
    July 28, 2011 at 5:56 PM
    Reply

    Ecc 6.0 INSTALLATION STEPS

    1) INSTALL WINDOWS 2003 SERVER

    2) THEN INSTALL OR RUN “ j2sdk-1_4_2_13-nb-5_0-win-ml.exe”.

    ITS JUST LIKE NEXT, NEXT, NEXT, FINISH.

    CLICK ON FINISH.

    AFTER THAT COPY THE “JAVA PATH” WHERE IT IS LOCATED.

    COPY THE PATH

    ‘E:\j2sdk1.4.2_13” AND PASTE IN ENVIRONMENTAL VARIABLES LIKE THIS

    RIGHT CLICK “MY COMPUTER” PROPERTIES == ADVANCED
    == ENVIRONMENTAL VARIABLES.
    ==

    Click on new

    TYPE IN VARIABLE NAME “JAVA_HOME”

    AND VARIABLE VALUE IS U R JAVA PATH PASTE HERE “E:\j2sdk1.4.2_13”

    I HAVE ISTALLED WINDOWS SERVER 2003 IN E DRIVE THAT WHY JAVA INSTALLED IN E DRIVE I HAVE GIVEN THAT PATH. NORMALLY IT WILL GO IN C DRIVE BY DEFAULT. OK

    CLICK ON OK.

    AFTER THAT GO FOR “ SYSTEM VARIABLES”

    IN THAT SELECT “PATH” AND CLICK ON EDIT .

    PUT “ ; “ AT THE END OF WBEM IN VARIABLE VALUE AND PASTE JAVA PATH UPTO /BIN. CLICK OK AND OK .

    AFTER THIS INSTALL “LOOPBACK ADOPTER”

    GO FOR == CONTROL PANAL

    === ADD HARDWRE

    CLICK ON NEXT

    SELECT “YES”

    SAY NEXT

    SCROLL DOWN “SELECT ADD A NEW HARDWRE DEVICE” AND CLICK NEXT

    SELECT “ADVANCED”
    CLICK ON NEXT

    SCROLL DOWN AND SELECT NETWORK ADAPTERS AND CLICK ON NEXT.

    SELECT MICROSOFT IN LEFT PANAL AND SELECT MICROSOFT LOOPBACK ADAPTER IN RIGHT PANAL. AND CLICK ON NEXT.

    CLICK ON NEXT

    IT WILL COPY FILES THEN

    CLICK ON FINISH.

    AFTER THAT GO TO START MENU= SETTINGS= “ NETWORK CONNECTIONS’ LIKE THIS

    RIGHT CLICK ON MICROSOFT LOOPBACK ADAPTER “PROPERTIES”

    GIVE ANYY IP ADDRESS LIKE THIS

    CLICK ON OK AND CLOSE.

    NOW WE ARE GOING TO INSTALL ORACLE 10g

    SELECT SETUP.EXE AND DOUBLE CLICK ON THAT

    Give PASSWORD AS “INDIA123” 2 TIMES
    AND SELECT NEXT

    CLICK ON NEXT

    CLICK ON INSTALL

    ORACLE 10G IS GOING TO INSTALL IT WILL TAKE 5 TO 10 MINS.

    CLICK ON OK

    CLICK ON EXIT.

    CLICK ON YES.

    ORACLE 10G INSTALLATION IS FINISHED. OK

    Change WINDOWS PASSWORD TO INDIA123

    GO TO MYCOMPUTER == MANAGE, SELECT LOCAL USERS AND GROUPS

    SELECT ADMINISTRATOR RIGHT CLICK “SET PASSWRD”

    CLICK ON PROCEED.

    Type India123 2 times ok.

    AFTER THIS ONWARDS SAP INSTALLATION STARTS.

    GOTO “IMASTER898\IM_WINDOWS_I386\NTPATCH”

    CLICK ON R3DLLINS.EXE

    CLICK ON OK

    THEN GO BACK TO PREVIOUS FOLDER.

    DOUBLE CLICK ON SAPINST.EXE.

    For ecc 6.0 you have to select SAP ERP 2005 SUPPORT RELEASE
    SAP SYSTEMS —– ORACLE ——– CENTRAL SYSTEM
    ——– CENTRAL SYSTEM INSTALLTION

    SELECT PATH LIKE THIS TO INSTALL BI 7..0 IT WILL ASK FOR LOG OFF

    CLICK ON OK AFTER LOGOFF SETUP WILL AUTOMATICALLY EXCUTES AND STEPS AS FOLLOWS.

    SELECT OPTIONS LIKE ABOVE OK AND CLICK ON NEXT

    BROWSE THE JAVA COMPONENT LIKE THIS

    CLICK ON OK AND AGAIN OK

    BROWSE THE PATH FOR JCE POLICY

    CLICK ON OK

    CLICK ON NEXT.

    GIVE SID “VJY” MY COMPUTER NAME IS BASIS FOR THAT SOLUTION MANAGER KEY IS 4083E624A9

    CLICK ON NEXT

    Give THE PASSWORD INDIA123 AND CLICK ON NEXT

    Give database id AS VJY AND CLICK ON NEXT.

    CLICK ON BROWSE GIVE THE PATH FOR INSTALLATION EXPORT 1 FOLDER PATH LIKE ABOVE. AND THEN CLICK ON OK AND OK.

    ENTER SOLUTION MANAGER KEY
    CLICK ON NEXT

    GIVE KERNAL PATH AND ORACLE CLINT PATH LIKE ABOVE AND BELOW

    CLICK ON OK. AND OK

    CLICK ON OK

    GIVE UKERNAL PATH LIKE ABOVE

    CLICK ON NEXT

    CLICK ON NEXT

    GIVE U R COMPUTER NAME AS OBJECT SERVER NAME MINE IS “BASIS”

    OK

    AND CLICK ON NEXT.

    CLICK ON START FROM THIS STEP ONWARDS INSTALLATIONS STARTS.

    AFTER U WILL CLICK ON FINISH .

    FRONT INSTALLATION

    Finish SAP GUI.
    POST INSTALLATION
    Config Logan

    Click on logan

    CLIENT : 000
    User : ddic
    P/ w : india123
    Click on Enter

  • R Naik says:
    July 28, 2011 at 12:37 PM
    Reply

    Hi , I want SAP IDES ECC 6.0 SR3,SOLMAN and BI 7.0 version DVD’s and the installation Procedure for installing in my Laptops.
    Can you please help me in send the price of the DVD’s and Installation Procedure.
    Thanks.

  • R Naik says:
    July 28, 2011 at 12:26 PM
    Reply

    Hi,

    I want SAP Ecc6.0 DVDs for installation. Can u give me details? or reach me at 09503810880.

  • Mukesh Solanki says:
    July 24, 2011 at 2:30 PM
    Reply

    Hi Raj,

    i would like to have .doc file of “SAP ECC v6.0 SR 3 IDES” installation steps and also wanted to know is there any major installation difference between SR2 and SR3.

    Thanks a lot

    Regards,

    Mukesh Solanki

    • Raj says:
      July 27, 2011 at 3:44 PM
      Reply

      There is no major difference between any SAP software installations. Only thing that confusing everybody about SAP Netweaver installations are configuring OS dependencies like Network configuration, Java Installation, Oracle installation and doing proper HDD sizing etc…. Rest are same for all the sap servers. Thanks
      Raj

  • Suvangkar Saha says:
    July 24, 2011 at 2:14 PM
    Reply

    Hi,

    I require SAP ECC 6.0 DVD for my own Practice along with Technical Module ABAP & Basis.

    Regards,
    Suvangkar Saha
    09163886695

  • Sen78 says:
    July 24, 2011 at 9:18 AM
    Reply

    HI, I need ECC 6.0 & SCM 7.01 IDES for learning purposes. Please advise how to download & install

    Thanks in Advance
    Senthil

  • shivakumarreddy says:
    July 21, 2011 at 1:26 PM
    Reply

    I want to install SAP Material Management and SAP Customer Relationship Management. How much hard disk space is required. Do needful regarding to this..I will contact you ..if provided the phone no. & email id.

  • Peter Schmidt says:
    July 20, 2011 at 1:07 PM
    Reply

    Hi my name is Peter, i want SAP IDES ECC 6.0 SR3 including BI 7.0 version DVD’s and the installation Procedure for installing in my Laptops.
    Can you please help me in send the price of the DVD’s and Installation Procedure.

    Thanks & Regards,
    Peter

  • shashanka says:
    July 19, 2011 at 7:17 PM
    Reply

    Hello Raj,

    Could you please send me screenshots for installation and sw DVDs for ECC 6.0 with EHP4.

    Regards,
    Shashank

  • Gildo says:
    July 14, 2011 at 11:47 PM
    Reply

    Hi Raj,

    I am interested for the SAP ECC 6 DVD’s can you please provide me the instructions of what I need to do?

    Many thx,
    Gildo

  • Franchini Daniele says:
    July 12, 2011 at 9:54 PM
    Reply

    Hallo I sent you even a mail. Please could you restablish my FTP server directory in order I can download the dump file for installation I’ve missed in a crash of my server system? Please let me reply at: dani2106@virgilio.it

  • Victor Nwabueze says:
    July 11, 2011 at 2:46 PM
    Reply

    Hi, I require SAP ECC 6.0 version DVD’s and the installation Procedure for installing in my Laptops.
    Can you please help me in send the price of the DVD’s and Installation Procedure.

    Thanks & Regards,
    Victor

  • Shashi says:
    July 9, 2011 at 9:48 PM
    Reply

    Hi I am Shashi, I want SAP ECC 6.0 version DVD’s and the installation Procedure for installing on Windows 7.

    Can you please help me in send the price of the DVD’s and Installation Procedure.

    Email: kr.shashi @gmail.com

    Thanks & Regards,
    Shashi

  • Ashish says:
    July 3, 2011 at 3:08 PM
    Reply

    Hey Raj…

    My name is Ashish . I am looking for installation guide for ECC 6.0 on Linux/Solaris. Do you by any chance have Inst guide for Linux. I am downloading the ECC 6.0 for Linux from SAP Marketplace.

    Please let me know at urss_truly@yahoo.com

    Thanx
    Ashish

    • Raj says:
      July 5, 2011 at 8:31 PM
      Reply

      Hi Asish,

      I do not have any installation guide to install ECC on Linux environment. I have neatly prepared installation screen shots for windows. After initial steps in Linux before entering into the actual sap installation steps, installation of ECC is same in both environments. If you need the installation screen shots for windows environment, please get back to me.

      Thanks
      Raj

  • Dj says:
    July 2, 2011 at 2:18 PM
    Reply

    I too want DVD version of ECC 6

  • robin saxena says:
    July 1, 2011 at 10:41 PM
    Reply

    hi
    can u plz send me the snap shots of installation of SAP ecc 6.0 to me,
    can i download the software through internet? can u send me the link also if possible(sap ecc 6.0)

    thanks in advance
    my email id is saxenarobindelhi@gmail.com

  • kasa says:
    June 30, 2011 at 10:59 PM
    Reply

    Hi raj,
    I would like to install SAP ECC 6.0 for my graduated.
    Now I have program but I don’t know step to install.
    Could you please help me?

    Thank & Regards,
    Kasa.

  • BRM says:
    June 27, 2011 at 8:07 PM
    Reply

    Hi Raj,

    I am interested for the SAP ECC 6 DVD’s can you please provide me the details.

  • nagireddy says:
    June 26, 2011 at 6:17 PM
    Reply

    Hi Raj
    Pls give details of
    SAP ECC 6.0
    Regards
    Nag

  • nagireddy says:
    June 26, 2011 at 6:16 PM
    Reply

    Hi raj
    I want ECC 6 DVDs
    Pls give details
    Regards
    Nag

  • Karthik says:
    June 24, 2011 at 11:27 PM
    Reply

    Hi,
    I would like to install SAP ECC 6.0 in my PC.
    My PC is 250GB-1GB RAM
    Dual Core.

    Which type of installation is better? Physical or Virtual?

    If you can mail your contact detail, I can meet you in person.

    Thanks in advance.

  • Suresh says:
    June 23, 2011 at 10:13 AM
    Reply

    Hi my name is Sures, i want SAP ECC 6.0 version DVD’s and the installation Procedure for installing in my Laptops.
    Can you please help me in send the price of the DVD’s and Installation Procedure.

    Thanks & Regards,
    Suresh

  • Atanu Banerjee says:
    June 22, 2011 at 10:29 PM
    Reply

    Hi Raj :

    Could you please let me know the details, in order for me to procure SAP ECC 6.0, along with the right version of Windows Server ?
    I would install it in my laptop, with external HDD. Do you think I have to compromise on speed in that case ? Thanks.

  • Atif says:
    June 22, 2011 at 4:39 PM
    Reply

    Hi,

    1. I want to install ECC6 SAP on Win 7, can it be done?

    Regards

    • Raj says:
      June 23, 2011 at 4:33 PM
      Reply

      Hi Atif,

      You can install VMware and create Windows server 2003 virtual machine and do the sap ecc6 installation. It will take long time to install but this way is the best way to install on win7 os without losing it. Please get back to me if you need more information.

      Thanks
      Raj

  • Muruganantham says:
    June 22, 2011 at 1:15 PM
    Reply

    Kindly send SAP ECC 6.0 IDES installation snapshot to muruka.nantha@gmail.com

    Thanks in Advance.

  • Muruganantham says:
    June 22, 2011 at 1:04 PM
    Reply

    Kindly send SAP ECC 6.0 IDES installation snapshot to muruka.nantha@gmail.com

    Thanks in Advance

  • wessam says:
    June 21, 2011 at 6:02 PM
    Reply

    yes i need sap ecc 6
    i’ve send you skype request
    also u can contact me at mail
    wes_97_5@yahoo.com

  • R.Sounder rajan says:
    June 19, 2011 at 12:53 AM
    Reply

    Hey dude
    I am Rajan ,
    I jus completed my training part in SAP ABAP i need to know the installation procedure of SAP ECC 6.0 Can u please send the corresponding info to my mail id
    i.e; rajan.rs2007@gmail.com / rsounderrajan@gmail.com

  • Guru Adoni says:
    June 17, 2011 at 2:11 PM
    Reply

    Hi,

    I am trying to install SAP ecc 6.0 on my desktop with Win 2003 server and Oracle 10g Db. Can you help in generating solution Manager key for the system details below.

    Host: Test
    SAP SID: D01
    Central Instance Number: 01
    DBSID:D01

    Thanks in Advance.

  • Saleemjaan says:
    June 16, 2011 at 6:36 PM
    Reply

    Hi Raj,
    Will you please email me as well.
    Thanks a million in advance…….. :)
    and your skype name if you dont mind giving me…….
    Regards,

  • Rakesh says:
    June 15, 2011 at 12:06 PM
    Reply

    Hi my name is Rakesh, i want to buy SAP ECC 6.0 version DVD’s and the installation Procedure for installing in my Laptops.
    Can you please help me in send the price of the DVD’s and Installation Procedure.

    Thanks & Regards,
    Rakesh.

    • Raj says:
      June 15, 2011 at 6:53 PM
      Reply

      I have sent a mail to you. Please check and get back to me. Raj

      • Suresh says:
        June 23, 2011 at 10:10 AM
        Reply

        Hi my name is Suresh, i want SAP ECC 6.0 version DVD’s and the installation Procedure for installing in my Laptops.
        Can you please help me in send the price of the DVD’s and Installation Procedure.

        Thanks & Regards,
        Suresh

  • mota_nginya@yahoo.com says:
    June 14, 2011 at 6:49 PM
    Reply

    Thanks a million for this inside information. I also need a step by step installation instruction. A pdf copy will be just fine by me and thanks again in advance for your help.

  • vijaya says:
    June 14, 2011 at 4:35 PM
    Reply

    Hi

    I want to practice FICO module. Is it possible to guide me how to install SAP ECC 6.0 on my desktop computer.

    Thanks
    Bujji

  • raghusrinath says:
    June 14, 2011 at 1:00 PM
    Reply

    hi,
    where can i get ides s/w so that i can install it on my laptop?? TIA

  • daniel ibarra says:
    June 12, 2011 at 8:11 AM
    Reply

    necesito instalar un software sap y quiero que alguien me ayude o me lo venda para instalar lo en mi computados
    muchs gracias

  • Sinvula says:
    June 11, 2011 at 9:17 PM
    Reply

    Hi
    I already having the ECC6 cd’s, could you please send me the upgrade steps from SAP/R3 4.7, as well as for new ecc6 on server 2008 and sql 2005.

  • Rohi says:
    June 11, 2011 at 9:08 AM
    Reply

    Dear Raj,
    Thanks for your post. Can you please explain the difference between ECC 6.0 EHP4 and ECC 6.0 SR2 and kindly send screen shot of ecc6.0 on my email id : dev0780@yahoo.com

    Thanks!
    Rohit

  • praveen says:
    June 11, 2011 at 12:54 AM
    Reply

    dear manish
    can you give me the SAP CD

  • David says:
    June 10, 2011 at 1:51 PM
    Reply

    Im sorry,

    my skype ID is Zerit083

  • David says:
    June 10, 2011 at 1:49 PM
    Reply

    Hi Raj,

    Thanks a lot for your guide in this website, it’s really helpful. however, Im finding some problems while installing SAP IDES SR2 ECC 6.0 in an external drive (500GB). I already set up the Vmware adn the Windows Server 2003+ Oracle 10.2 but I have some doubts about the lookback adapter, and how SAP has to be installed in the virtual machine.
    Could you please add me in Skype ? zeri083 so we can talk and if further help needed I would mind to buy your guide.

    Thanks a lot again and best regards,
    David

  • naresh says:
    June 7, 2011 at 8:00 PM
    Reply

    Hi Raj,

    I would like install SAP FI/CO ECC6 please guide me

  • Irwan Ahmad says:
    June 3, 2011 at 7:34 AM
    Reply

    Hi Raj,

    Im installing Ides on Win 2008 r2 with msql 2008. Can i have the step guide for this installation. Im new to SAP.
    my email : vlans@hotmail.com

  • Manish says:
    June 3, 2011 at 7:18 AM
    Reply

    Hi Raj,

    I already have 10 cds of ecc 6.0 and server but do not have step by step procedure. can u please help or can i only buy the step by step screen shot. Please email me your contact info so that i can call u.

    Thanks
    Manish

  • Kuldip Jain says:
    June 2, 2011 at 5:37 PM
    Reply

    For Installation of SAP IDES or Learn SAP BASIS kindly mail me at kuldipranka@yahoo.com.
    with out charge

  • Kuldip Jain says:
    June 2, 2011 at 5:35 PM
    Reply

    For Installation of SAP IDES or Learn SAP BASIS kindly mail me.
    with out charge

  • Manju says:
    June 1, 2011 at 4:37 PM
    Reply

    Hi,
    I want sap ides ecc6.0 .if u have please send me

  • Manju says:
    June 1, 2011 at 4:35 PM
    Reply

    I m intersted to buy CD of IDES ECC 6.0 can u let me know ur contact number

  • Kiran says:
    May 30, 2011 at 8:16 AM
    Reply

    Hello Raj
    I have downloaded SAP ECC 6.0 software in my laptop. I need help in installation. Can you do help me? If yes pl give me your contaact details. so that you can install
    Regards
    Kiran

    • SANTOSH KUMAR says:
      June 26, 2011 at 6:15 AM
      Reply

      Hai this is santosh from hyderabad, ap,india… i can help u for installation of ecc 6.0… i am waiting for ur reply..

  • sanjeev says:
    May 28, 2011 at 9:25 AM
    Reply

    Hi Raj,

    I need windows version of SAP ECC6 SR2 with ms sqlserver (NOT ORACLE !) AND linux version of SAP ECC6 SR2 with oracle. Please let me know about the dvd details and cost.

    Email: sanjeevkmb@rediffmail.com

  • Nick says:
    May 28, 2011 at 4:05 AM
    Reply

    What is the cost of getting ECC 6 DVDs (ftp downloads vs shipment) and installation? What kind of support available in case installation failed.

    I am planning to install it on a SQL2008/WinSever2008 combination (purely MS shop).

    Thanks,

  • Fatima says:
    May 27, 2011 at 3:33 AM
    Reply

    Hi,

    I would like to buy your SAP IDES ECC 6.0 DVD’s installation and support during the installation. Please, could you contact me for price (for DVD’s and remote installation) and details.

    Thank you
    Fatima

  • Jetendra says:
    May 23, 2011 at 1:19 PM
    Reply

    HI,
    am ready to pay how much ever u need to the max 3k, but can u install SAP in windows 7

  • sanjeev says:
    May 22, 2011 at 3:34 AM
    Reply

    I need SAP ECC6 SR2 with ms sqlserver (NOT ORACLE !). Please let me know about the dvd details and cost. How is the cost of sending DVDs within india and how long will it take.

    Can I use the ms sql server 2005 developer edition downloaded from microsoft or do i have to use the ms sql from sap ? Can you explain the ides ms sql installation process

    Please email me the details to sanjeevkmb@rediffmail.com

    Thank you

  • sanjeev says:
    May 22, 2011 at 3:10 AM
    Reply

    I am looking for the 32 bit, linux version of SAP ECC6 SR2 with oracle. Please let me know about the dvd details and cost.

    Do you have the linux version of sap r3 4.7 ee with oracle ?

    Please email me the details to sanjeevkmb@rediffmail.com

  • satish says:
    May 21, 2011 at 5:43 AM
    Reply

    Hi,

    Could you please provide how to generate solution manager key and also provide you contact details to get in touch with you regarding any system errors while installing sap Ecc6.

    Thanks in advance for your great help.

    Regarding
    Satish

  • Dave says:
    May 18, 2011 at 2:21 AM
    Reply

    I would like to buy SAP ECC 6.0 to practise SD Functional module, can you please reply me at your earliest, i need to know the price and how to pay you.

  • Anand says:
    May 13, 2011 at 3:22 PM
    Reply

    Hi Sir, I am Anand. I am Interested in SAP IDES Installation Training. Please Send Your Details For Training.

    Anand

  • kshama says:
    May 13, 2011 at 12:58 PM
    Reply

    Hi,
    I had purchased 8 DVD’s from my vender but m unable to install SAP.Whould you like to help us out.

    • Raj says:
      May 14, 2011 at 12:07 AM
      Reply

      Hi I can provide you the installation screen shots for 1000 INR or 25 USD. With these installation screen shots you can install ECC 6.0 SR2 on your PC or laptop easily. Please reply back if you are interested to get the document. Thanks Raj

  • Sarbeswar Nayak says:
    May 12, 2011 at 1:13 PM
    Reply

    HI,

    I Need to istall SAP ECC6.0 for FICO in my new DELL Inspiron 14R laptoop ( Confg- I3 Processor, 4Gb RAM, 500 GB Hard DIsk). Please let me know can installation possible. What would be cost of CD s and what cost of installation only.
    Request an urgent reply.
    Regards
    Sarbeswar

    • Raj says:
      May 14, 2011 at 12:08 AM
      Reply

      Hi, I can do the online remote installation of SAP ECC 6.0 SR2 or EHP4 for $120 or 5000 INR. Please get back to me if you are interested. Thanks Raj

  • A KUMAR says:
    May 7, 2011 at 10:46 AM
    Reply

    DEAR DEAR PLEASE HELP ME
    i am getting the error SAPAPPLO_7 IMPORT PACKAGE

    IN IMPORT MONITOR JOBS: RUNNING 3 WAITIONG 43 COPLETED 65 FAILED 0 TOTAL 112
    AS A ABAP

    • Raj says:
      May 11, 2011 at 8:19 AM
      Reply

      Hi Kumar, Recopy the export file from your dvd and retry again. You can find the corrupted file from log files. Thanks Raj

  • phani kumar says:
    May 2, 2011 at 10:10 PM
    Reply

    Hi ,

    i need sap ecc 6.0 ehp5 installation dvds kindly call me on 9686401233

  • phani kumar says:
    May 2, 2011 at 10:07 PM
    Reply

    Hi,
    I want SAPECC 6.O EHP5 installation cd and the procedure for installing.

    If any one interested in providing this service contact me at 9686401233

  • Hussan says:
    May 2, 2011 at 7:23 AM
    Reply

    I am interested in ides ecc6.0. Please let me know how to get the disks. Email me if you are interested in selling ides ecc6.0 disks.

    thussan@gmail.com

  • Mario says:
    April 29, 2011 at 11:58 PM
    Reply

    How can I get the installation DVDs?

    BR.

  • Deepak SINGHAL says:
    April 29, 2011 at 6:02 PM
    Reply

    Hi I am interested for SAP IDES ECC 6.0 Installation at my laptop. Any one dealing with same please revert at my mailid deepaksinghal31@gmail.com or at my cell 91 9654676979. Delhi/NCR preferred.

  • Suresh says:
    April 29, 2011 at 2:02 PM
    Reply

    Hi – I am interested in getting the IDES DVDs. Please email me or send me a message with details.

    Regards,

    -Suresh

    • Raj says:
      April 30, 2011 at 7:41 PM
      Reply

      Hi Suresh, I can provide you the ftp details to download the ECC 6.0 SR2 IDES along with installation screen shots just for $125. You can use this installation for practice SAP modules at home. Please get back to me if you are interested. Thanks Raj

  • Happison says:
    April 20, 2011 at 1:15 AM
    Reply

    In need of sap ecc 6.0 installation dvds to install on my PC. Please contact me.

  • suhasini says:
    April 19, 2011 at 10:56 PM
    Reply

    Thank U sir for giving dis infor.Just 2days back i have learned eccsap6.0 installation.i got error while installing eccsap6.0.os,java and oracle successfully installed.but,while im installing sap ie.when im clicking on sapinst.exe it shows error like ianxsyeex.x:455 ………..and so on some error.wat can i do.i hope u may understand my problem.please if u know slove it.

    Thanks
    Suhasini Reddy

    • laxmi says:
      April 23, 2011 at 10:09 AM
      Reply

      Sorry, I have not seen this type of error as on today while installing SAP. Did you have the good software with you? Which operating system you have installed. Did you set the page file as 3 times of your system RAM? Please get back to me with answers to my questions. i will try to understand your problem and get back with the answer.

  • ruchir says:
    April 18, 2011 at 2:10 PM
    Reply

    i need ecc 6 cd/dvd’s
    ruc2r@rediffmail.com what’s the price

  • ruchir says:
    April 18, 2011 at 2:05 PM
    Reply

    i need sap DVD’s ecc 6

  • arpit says:
    April 11, 2011 at 6:07 AM
    Reply

    please contact me @ +91- 9411641813 or tell me your contact details regarding the purchase of ides ecc 6.0 and its installation.

  • Phalgun says:
    April 9, 2011 at 9:11 PM
    Reply

    Hi i want to purchase 10 DVD of SAP 6.0 and want to learn the method of installation from you.
    Can you please provide me your contact details.

  • Anil Khetpal says:
    April 8, 2011 at 5:59 AM
    Reply

    I need SAP installed on my personal laptop…..could you please help. Please write your contact details and I can call you.
    Anil

  • Anklesh Chauhan says:
    April 6, 2011 at 3:19 PM
    Reply

    Thank you so much …

    Regards,

    Anklesh Chauhan

  • Anklesh Chauhan says:
    April 6, 2011 at 9:51 AM
    Reply

    Please help me generate the solution manager key for SAP IDES ECC6 Installation

    My specifications are
    SAPSID = YAS
    Central Instance host = YAS
    Central Instance number = 00

    Please email me at ankleshchauhan@gmail.com

  • cheryl bunch says:
    April 5, 2011 at 10:36 PM
    Reply

    Do you have the actual SAP IDES software? I am looking for a download of the IDES 6.0. Thanks!

  • lokeswara says:
    March 31, 2011 at 9:17 PM
    Reply

    plz send a sap basis course meterial….to my mail

  • Arun Singhal says:
    March 26, 2011 at 8:53 AM
    Reply

    Hi, can you please provide me your contact nos. I am intd in IDES installation

  • Deepak says:
    March 25, 2011 at 10:51 PM
    Reply

    Can I have the portal installed with ECC 6.0 if I purchase the DVDs from you

  • emilio says:
    March 24, 2011 at 10:50 AM
    Reply

    I already have installed the SAP IDES ECC 6.0, but the key has expired, is it possible you can generate a new code that I can entry on my sap installation to extend it? i’m a rookie, so I will need support to do it, at lease a guide to do it

    apredersap@live.com

  • R P Singh says:
    March 22, 2011 at 4:11 PM
    Reply

    Please contact me at : ap3683@gmail.com
    for SAP ECC 6.0 IDES Software DVDs with complete Installation screen shots to practice the modules like SD, MM, PP, FICO, HR, PM, PS, ABAP,etc. at home.
    I also have the training materials in soft copies with complete step by step screen shots to practice the following modules: SD, MM, PP, FICO, HR, PM, PS.Please
    email me to know the price.

  • Pavan says:
    March 9, 2011 at 7:39 PM
    Reply

    HI ,

    I can install SAP ECC & I have SAP Dump ( Backup software ) .

    Please contact me on saperp.install@gmail.com

  • Blazer says:
    March 4, 2011 at 2:29 PM
    Reply

    Raj,

    You did not respond to me about the corrupt files. For over a week now ive been emailong u. Its unfortunate that I have not made any progress in this long.

  • Samuel says:
    February 26, 2011 at 5:59 AM
    Reply

    I really want to get trained in Sap Basis,can Raj get me trained?how much are we looking at for the training .I am from Nigeria.I mean for online training

  • Blazer says:
    February 22, 2011 at 1:13 AM
    Reply

    Do i get both the ECC 6.0 SR2 and the EHP4 or just one through this download.
    I still have a 32bit machine and i’m not ready to upgrade yet. How do i get the SR2 so i can still use my machine the way it is?

  • jeyakumar says:
    February 17, 2011 at 2:13 PM
    Reply

    Hi,
    I want sap ides ecc6.0 back up.if u have please send me

  • ameer basha says:
    February 16, 2011 at 12:06 PM
    Reply

    HI RAJ,

    This is AMEER BASHA, i would like to know something regording ecc6.0 , i had installed ecc6.0 in my virtual machine on my laptop .few days it works properly gently , after that it will slow suddenly , give me one tip to increse performance
    i am using 4 gb ram and 500gb hard disk
    i had add 2gb and 300gb hard disk to my virtual machine
    and remaining is to laptop
    give me any suggestion

    thanks
    AMEER BASHA

    • Raj says:
      February 16, 2011 at 3:02 PM
      Reply

      Hi

      Where are your virtual machine files located? Internal Laptop HDD or External HDD? If you have them on external HDD, will work little bit slow.

      Thanks
      Raj

  • raghu says:
    February 12, 2011 at 12:48 PM
    Reply

    hi raj
    i want to buy new laptop for sap installation but thing is i am in confusion with which specification we can do that . i had heard that corei3 processor will not support this sap application .
    my kind request is to send me specifications …
    i hope u will send …
    innovative.raghu@gmail.com

    • Raj says:
      February 14, 2011 at 7:58 AM
      Reply

      Hi
      I3 processor is also ok for installing ECC 6.0 EHP4. You can buy minimum 500GB and 4GB RAM computer or laptop to install ECC 6.0 EHP4 with IDES to practice SAP modules at home.
      Thanks
      Raj

  • Kumar says:
    February 8, 2011 at 8:26 PM
    Reply

    Hi , Any any want SAP ECC6 SR3 with installation guide at lowest cost($50) can contact me at kumar198@gmail.com
    Thanks

  • Kumar says:
    February 7, 2011 at 9:04 PM
    Reply

    Raj,

    Which version do you have SR2 or SR3 , Kindly tell the discounted price. I am in chennai.
    amurugan.p at gmail dot com

  • saharoon says:
    February 7, 2011 at 11:08 AM
    Reply

    sir,
    I tried to install IDES on windows server 2008.its shows some error like “usr could not be established on ur drive”.how to rectify this error,how to gave full access to all the user on particular drive in server 2008

  • saharoon says:
    February 4, 2011 at 2:56 PM
    Reply

    Sir.
    i tried to install IDES on linux its somewhat complicated…well thank you for your kind information

  • Sagar says:
    February 3, 2011 at 10:56 AM
    Reply

    I want to install ECC 6.0 IDES on my laptop(having windows 7 OS ).
    Please send me price details for the same.

    • Raj says:
      February 3, 2011 at 10:38 PM
      Reply

      Hi Sagar,

      To install the SAP software on Windows 7, you have to use any virtual software. On your windows 7 host operating system, you have to install windows server operating system to be able to install any SAP system. Please send a mail to my mail address to discuss further details. My mail ID is punarvasi@gmail.com

      Thanks
      Raj

  • saharoon says:
    February 2, 2011 at 7:58 PM
    Reply

    sir
    im very young in this SAP field.im just 22,is it possible to install SAP IDES in SUSE Linux Enterprise Server without installing any Database software like SQL,MAXDB …etc..

    • Raj says:
      February 3, 2011 at 10:35 PM
      Reply

      Hi Saharoon,

      I think SAP Software is completely depends up on a database, there is SAP software without a database. You have to install Database software before starting or while installation of SAP. Frankly I do not know how to install this software on Linux platform. Please consult somebody else. I give support only on windows platforms.

      Thanks
      Raj

  • Chandu says:
    January 31, 2011 at 11:28 PM
    Reply

    Please send me price and detail to my email id

  • Anuradhan Anandan says:
    January 25, 2011 at 10:34 AM
    Reply

    hi,
    I like to install sap ecc6.0 Abap,sd and crm.
    let me know, whether your 10dvds meets my requirements.
    I am in india.
    so, kindly quote me the price to ar.anandan@yahoo.com

    Looking forward for your reply.

    regards
    ar.anandan

  • Sunchul says:
    January 24, 2011 at 7:11 PM
    Reply

    Dear Raj,

    I want to install SAP on my PC, so I need SAP DVD. Tell me how I can buy SAP and environment of installation.
    I want to study MM and PP of SAP.

    Thanks

  • Sunchul says:
    January 24, 2011 at 3:57 AM
    Reply

    Dear Raj,
    I would like to study SAP. Would you please let me know, if you have all the materials ( CD with details screen shot) to learn from home. Please email me all the details and cost to learn Sap Fi module at ysch90@naver.com

    Also I am in South Korea and I want to know if you can ship to South Korea.

    Thanks

    • Raj says:
      January 24, 2011 at 9:47 AM
      Reply

      Hi

      I am a basis consultant, I can teach SAP Basis online. I can not teach FI module. But, You can practice FI Module with the dump i am providing. I can ship to south Korea. Please get back to me if you are interested. You may get response from my other blog readers who are interested to teach you online for FI module.

      Thanks
      Raj

  • Srinivas says:
    January 20, 2011 at 9:06 AM
    Reply

    Hi Raj,

    Thanks for your response.

    Yes I can install Win 2003 Server, but I do not have SAP IDES 4.7 installation software. Can you help? Please send software purchase details to my email.

    regards,
    Srinivas.

  • Srinivas says:
    January 19, 2011 at 2:51 PM
    Reply

    Hi Raj,

    Iam in Singapore and interested to get the SAP FI module installed by you. My laptop configuration is below,

    Intel Pentium M Dothan 730 (1.6GHz, 533MHz FSB)
    2GB DDR2 RAM at 533MHz
    ATI x300 graphics card
    160GB Hard Drive
    DVD-ROM/CD-RWx24

    Please let me know the price for online installation and price if I purchase DVDs to my email bhimavarapu@yahoo.com

    Also send me your contact number..thanks

    best regards,
    Srinivas.

    • Raj says:
      January 19, 2011 at 3:12 PM
      Reply

      Hi Srinivas,

      What operating system you have on your laptop now. Will you be able to install windows server 2003 operating system directly on your computer?

      Your HDD capacity is not enough to install ECC 6.0 SR2. You can install 4.7 IDES on your laptop.

      Please answer my previous questions. So that i can guide you properly.

      Thanks
      Raj

  • Dil says:
    January 16, 2011 at 1:42 AM
    Reply

    Dear Raj, I’m a SAP FI end user and I would like to get trained in FI module. Would you please let me know, if you have all the materials ( CD with details screen shot) to learn from home. Do mail me all the details and cost to learn Sap Fi module at ispydil@gmail.com
    Regards, Dil

  • Rajan says:
    January 7, 2011 at 4:20 AM
    Reply

    Hi Raj

    I am fine with ecc6.0 sr2 and bi 7.0 vmware images…..if u r planning to give dump u neeeed to send me the install instructions.Anyway let me know if u can install remotely or simply give vmware images…and what abt license..how many months i can use those vmware images for practising. Let me know how much it costs?

  • enjoyingsap says:
    January 6, 2011 at 11:49 AM
    Reply

    Please, send me instruction for EHP4 in VMware for a intel I3 with 500 Gb. Payment instructions.
    Regards.

  • Rajan says:
    January 6, 2011 at 6:17 AM
    Reply

    Hi Raj,

    I am interested to learn SAP BI 7.0 and i also need to practise SAP ABAP and R/3 extractions. I want the whole SAP installed on VMWARE. I got VMWARE 7 license…..i need to learn SAP Business objects..so is it possible for you to install remotely..what is ur cost of service along with software and can u please let me know if i can purchase the software and install screen shots for SAP ecc SR2, SAP Bi 7.0 + SAP business objects…in future if the system crashes. I need to get it installed on my VM..because i do not want to format the existing win 7 home premium as it is brand new laptop…….

    • Raj says:
      January 6, 2011 at 8:52 AM
      Reply

      Hi Rajan,

      I do not have business objects. I have ecc 6.0 sr2 and bi 7.0 vmware images and the dump of the software. Which one you need? Dump or VMware Imange? Please get back to me with your option. I will provide further details.

      Thanks
      Raj

  • richard says:
    January 5, 2011 at 10:39 PM
    Reply

    Hi are you stil offering this service?
    A question, what’s about the licence? can I have a problem?

    • Raj says:
      January 5, 2011 at 10:42 PM
      Reply

      Hi

      Yes. All installations are for 4 weeks. Put the system date forward, install the software and bring the date back to original. So that it will not expire. So you can practice as long as you want. I think this information clarifies your doubt. Please do not hesitate to ask me further questions on this.

      Thanks
      Raj

  • enjoyingsap says:
    January 1, 2011 at 6:48 PM
    Reply

    Hello.

    I have just buyed a new computer. It’s a Hewlett Packard model G62.
    Processor Intel Core I3-350M (2,26 GHz)
    Hard disk of 500 Gb
    Memory of 4 Gb

    Is it possible, installation of ECC in this system?
    Please contact me.

  • Ric says:
    December 29, 2010 at 7:42 AM
    Reply

    Hi…

    Can I purchase the DVDs from you and install to a few laptops? Any restriction on that?

    Thanks

  • website design gold coast says:
    December 18, 2010 at 8:31 PM
    Reply

    Dear Raj

    I am new to SAP world . How many DVD will be if I need to get the complete list of all modules you have in your collection DVD include solution manager etc

    Send me an email at nafeesra50@hotmail.com please send a copy of this email to nafeesra@yahoo.com with subject line SAP IDES DVD

    Please provide me the cost and tell me if they are avaliable for download

    Thanks

  • Sijo says:
    December 12, 2010 at 3:40 PM
    Reply

    Hi, Raj
    I have windows 2008 server(64 bit)installed in my lap. Is it possible to install your s/w version in 64 bit os.
    and if possible please send me your contacts and price details for installation with DVD on joysijo@live.com

    thank in advance
    Sijo

    • Raj says:
      December 14, 2010 at 11:17 AM
      Reply

      Hi, Sijo

      You can install ECC 6.0 EHp4 software on 64bit machine in 64bit OS without any problem. I have the installation screen shots of ECC 6.0 EHp4 in a word document to install on 64bit machine with 64 bit operating system. I can send this document to your mail id for $15. Please send the payment to my paypal account bujjirk@gmail.com if you need it in maximum 24 hours. This price is only for document.

      Please ask me questions about ecc ehp4 installation here, If you have partial knowledge in it. I will try to help you at free of cost. Ask me questions like how to configure page file, java installation, oracle installation, configuring java….etc for sap installation. This information will be useful to other learners. My main intention is to share the knowledge online.

      Thanks
      Raj

  • Rizwan says:
    December 11, 2010 at 2:31 PM
    Reply

    Please give me the detail of SAP that you r providing with COST!
    regards,
    Rizwan.
    rizwan.ahmeds@gmail.com
    rizwanahmed_pk@hotmail.com

    • Raj says:
      December 11, 2010 at 5:19 PM
      Reply

      Hi

      I am providing online installation of SAP ecc 6.0 sr2. This installation can be helpful to practice many sap modules like Basis, Abap, FICO, SD, MM, PP, HR, WM…etc. I am charging $100 for online installation. Please get back to me if you are interested.

      Thanks
      Raj

  • SAPLearner says:
    December 4, 2010 at 6:42 AM
    Reply

    Hi Raj,

    Is it possible to install ECC IDES 6.0, MDM , SOLMAN, SRM 7 , EP on a 2TB external portable USB drive which can be connected to either desktop or laptop and can access any of the above SAP Applications through VMware ?

    If yes then please let me know the cost of it asap and how much time you will take to deliver it ?

    Regards,
    SAPLearner

    • Raj says:
      December 4, 2010 at 3:34 PM
      Reply

      Hi SAPLearner

      You can install any number of SAP systems in single server directly or through virtual machines in an external drive. You should have better configuration in your server run multiple SAP systems. I do not have MDM readily with me right now. I can give you ECC 6.0, Solution Manager, SRM, EP. If you are interested please get back to me. I will provide you the remaining details.

      Thanks
      Raj

  • Don says:
    December 3, 2010 at 10:25 PM
    Reply

    Hi Raj,
    I wanted to learn SAP BI. Does SAP BI comes as part of ECC6?
    And is it enough if I purchase the 10 dvds+windows server 2003. Please send me the price details (discount please) to my mail id.

    thanks.

    • Raj says:
      December 4, 2010 at 3:42 PM
      Reply

      Hi Don

      I do not have idea about activating BI in ECC. Some body was telling that we can activate BI in ECC itself. I can only install and configure to communicate with ECC as separate system. Please get back to me if you are interested to buy both ECC and BI. I will provide you the further details.

      Thanks
      Raj

  • Sukumar says:
    November 29, 2010 at 3:04 PM
    Reply

    Hi Guys,
    I have a quick query related to SAP..

    Previous I was using a desktop where SAP software(on WINDOWS server) is installed on INTERNAL HARDDISK.. Now I bought a new DELL laptop (XP is installed). How can I use that Harddisk with my DELL laptop.

    Need your help guys. Please help me …

  • Naveen says:
    November 28, 2010 at 1:44 PM
    Reply

    Hi Raj,

    I have a few queries. I want to install the software on Windows XP SP2, is that possible?
    I would like to know the price ( discounted) for the DVDs and Windows Server 2003 CD [if it doesn't work on XP]. Do let me know.
    What is the reliability of the Software?
    you can mail me at: pnk_cooldude@yahoo.co.in

    Thanks,
    Naveen.

  • pavan says:
    November 26, 2010 at 4:00 PM
    Reply

    hi raj,
    this is pavan, i need information regarding the system configuration for sap basis. if can i install the sap ecc6.0 in i3 r i5 process system. Is it sutable for that. suggest me to purchase the new pc.

    regards
    pavan

    • Raj says:
      November 26, 2010 at 5:28 PM
      Reply

      Hi Pavan

      The minimum system configuration requirement to install ECC 6.0 EHp4 is 4GB RAM and 500 GB HDD. Processor can be anything better than pentium IV processor. You can practice sap basis perfectly with this type of system. Some basis experiments like configuration transport management system needs more than 2 servers like this to practice.

      Thanks
      Raj

  • nong says:
    November 24, 2010 at 4:22 PM
    Reply

    Hi

    Can provide SAP ECC6 ehp4 + Portal including ess mss + e Recruiting

  • vinnie2k69 says:
    November 22, 2010 at 8:03 AM
    Reply

    Hi Raj,

    Thanks for your email on the ECC6 for Linux. I would like to know what it woulf cost for the DVD’s. The Linux OS is Centos 5.1 32 Bit or can use any 64 bit Linux OS you recommend. Hardware is good business class hardware. dual pentium xeon 64 bit capable with 4 GB Ram, and about 320GB disk space. Can up this a bit more if required.

    Could you email me vinnie2k69@yahoo.ca I will also try to call later this evening.

    • Raj says:
      November 22, 2010 at 11:00 AM
      Reply

      Hi

      I am still not comfortable with Linux OS. So i can not guide you more on installing ECC on Linux OS. I am perfect in installing any netweaver product on windows environment (32 bit and 64 bit). Please ask me question on windows platforms. You can find and place the information here in this blog about linux installations. It will help and also to my blog readers.

      Thanks
      Raj

  • Felipe says:
    November 21, 2010 at 11:58 PM
    Reply

    Hi Raj,

    I want to buy the CDs. Can you deliver by download (ftp)?

    I can pay by PayPal.

    Thanks,

    Felipe

  • Sathish says:
    November 21, 2010 at 9:35 PM
    Reply

    You can get all the versions for damn cheap here:
    http://sapint.blogspot.com/

  • manasa says:
    November 21, 2010 at 11:42 AM
    Reply

    Hi Raj ,

    I am looking for SAP FICO learning CDS only . Could you please let me know the price . manasakedari@gmail.com

  • Rahul singh says:
    November 17, 2010 at 1:04 PM
    Reply

    I have the 9 DVDs of ecc 6.o. 1to7 DVDs for sap and no 9 dvd include GUI 7.0,ORACLE 10G,ORACLIENT.
    No 8 DVD include MASTER(2005_SR2_IDES_Installation_Master),NW_2004s_SR2_Kernel_WINDOWS__LNX_X86,
    j2sdk-1_4_2_12-windows-i586-p, jce_policy-1_4_2.
    I have partition my 500 gb HD by C(40), D(240), E(50), F(170). I’ve installed 2003 server in C drive and XP in E drive.
    I’ve video installation guide also.I have purchased it by rs 3500/-. But now after payment my money, i see that installation guide has been downloaded from net. it is not original installation guide. He do not give me the after sale support. He demand more 1000/- for fresh installation.
    But i can not trust him no more. Will u kindly send me the proper installation screenshot for a concessional rate.
    I will send my video screenshot to you. my Email id sapstudent10@gmail.com

    • Raj says:
      November 17, 2010 at 1:52 PM
      Reply

      Hi

      Where are you from. I will give you online support for remote installation. I have complete installation screen shots. Ask me about your specific problem where you are getting confusion. I will give you free support for specific errors. But for complete support you have to pay some charges.

      Thanks
      Raj

  • Deejay says:
    November 15, 2010 at 3:21 PM
    Reply

    Hi
    When i can get his product for my self i am new in to SAP. I need this for administration purpose and installation purposes. Please let me know the price.

    my mail id is deejy731@hotmail.com

  • zIAUDEEN says:
    November 15, 2010 at 7:44 AM
    Reply

    Hi Raj..

    i am ziaudeen here. i want to install sap ecc 6.0 ehp 4 in my system. could you tell system configuration please.

    then i have seen somebody is using sap through vmare software. what is that exactly…

    • Raj says:
      November 16, 2010 at 7:11 PM
      Reply

      Hi

      System configuration required to intal SAP ECC 6.0 EhP4 is as follows…
      1. RAM – 4 GB Minimum
      2. 64 Bit machine and 64 bit OS
      3. 500 GB Hard Disk Drive
      4. Processor – Any 64 bit processor more than or equal to dual core

      VMware is a software which will enable us to install most of the operating systems as virtual. We can run host operating system and virtual operating system simultaneously. It is just like dual boot (diiferent operating systems) but we can not run 2 operating systems in the case of dual boot. We can use multiple operating systems without restarting host operating system using VMware.

      Please get back to me if you need any further infromation about installing ECC 6.0 EhP4 on your computer.

      Thanks
      Raj

  • Karl says:
    November 14, 2010 at 7:38 AM
    Reply

    I’m interested on SAP ECC 6.0 & EHP4, CRM 6.0, BI 7.0,GRC, EP 7.0 , Solution Manager 7.0 , PI 7.1.

    Kindly send me price quote and details. How reliable?

    • Raj says:
      November 14, 2010 at 9:34 AM
      Reply

      Hi
      I am writing this blog to post all of my experiences on netweaver products. I trust, I can get business only through reliability. So I am reliable in giving support to my customers like you. You will become friend of mine after completion of first deal. I do not trust faking employers or employees by py putting false experiences. I do what i know. So that you will not get any problem in dealing with me. If you want to continue further discussion with me, please write a mail to me on my mail punarvasi@gmail.com

      Thanks
      Raj

  • Oscar says:
    November 13, 2010 at 7:37 PM
    Reply

    Hello,

    I have some questions.
    1) SAP ERP + BI installtion is not possible with
    a) Pentium 4
    b) 500 GB
    c) 4 GB RAM because of to less RAM

    2) BI installation without SAP ERP is
    not possible ?

    3) Could you provide me with a newer
    installation guide. The best is video
    plus written text ?

    4) Could you do remote installation
    support , ex via Teamviewer ?

    Regards,
    Oscar

    • Raj says:
      November 14, 2010 at 9:26 AM
      Reply

      Hi

      EHP4 can be installed only on 64 bit machines. Because Pentium 4 is 32 bit processor, you can not install EHP4 on your machine. You can install either SAP 4.7 IDES or ECC 6.0 SR2 on your machine. BI can be installed separately without ERP. BI IDES will have separate sample data for practice. I have installation screen shots of all SAP netwever products as well as R/3 products. Which one do you need. I do remote installation of any type of R/3 or Netwever products. I use Teamviewer for remote installations.

      Thanks
      Raj

  • SJ says:
    November 11, 2010 at 11:08 AM
    Reply

    Hi Raj
    Thanks for the DVD’s. I really appreciate your help and thanks for responding to my calls.
    ” Excellent Service”

  • vinnie says:
    November 6, 2010 at 6:30 AM
    Reply

    is there a version of SAP IDES ECC 6.0 that will run on Linux, and do you have experience in that .. Vinnie

    • Raj says:
      November 6, 2010 at 11:27 PM
      Reply

      Hi
      I also do ECC 6.0 on Linux also. Do you want to me to do remote installation? Where are you from. What is the hardware configuration you have. I will tell you whether your hardware supports for installing ECC 6.0 on Linux or not.

      Thanks
      Raj

  • vinnie says:
    November 6, 2010 at 6:29 AM
    Reply

    Is there an IDES version that will run on Linux ? Do you have experience in that area ?

  • Surya says:
    November 1, 2010 at 10:21 PM
    Reply

    I need installation steps of ECC please call me 91 – 9441779405 or mail me (vvsuryakumar@yahoo.com)

    waiting for your quick response

    my USA number : 1 302 525 2655

    contact me immediately

    need

  • baywalk says:
    November 1, 2010 at 7:12 PM
    Reply

    We provide sap access at affordable cost

    IS_UTILITY
    IS_RETAIL
    IS_OIL
    CRM7
    ECC6/BI7
    EP (Enterprise Portal)
    PI (Process Integration)
    BPC (business process & consolidation)
    ESS_MSS

    We also provide installation for individual learning only…each installation is separate….

  • baywalk says:
    November 1, 2010 at 6:49 PM
    Reply

    Hello,

    We provide sap access at affordable cost

    IS_UTILITY
    IS_RETAIL
    IS_OIL
    CRM7
    ECC6/BI7
    EP (Enterprise Portal)
    PI (Process Integration)
    BPC (business process & consolidation)
    ESS_MSS

    We can also provide installation for individual learning only…each installation is separate….

  • Leepock says:
    October 28, 2010 at 6:28 AM
    Reply

    Do you have sap training courses like sapecc6.com has?
    regards

    • Raj says:
      October 28, 2010 at 9:25 PM
      Reply

      Hi

      Sorry I am not having any sap courses. If you want i can suggest SAP courses and Institute. Please tell me what you are looking for. I mean want module in sap you are looking.

      Thanks
      Raj

  • Alex says:
    October 27, 2010 at 12:15 AM
    Reply

    Hi again,
    thanks for replying to me.
    Would it be possible to buy/install SAP ECC 6.0 sr3 IDES for the only PM module?
    I am thinking a lighter version than a full one.
    Thanks again

    Alex

  • Alex says:
    October 26, 2010 at 10:25 PM
    Reply

    Hi,
    I am new in SAP ECC IDES and I would like to learn/practise on SAP PM (Plaint Maintenance) module. So before buying these dvd’s my easy question for you is : Suppose I got and installed SAP ECC 6.0 sr3 with success on my pc. Does SAP ECC 6.0 sr3 contain the SAP PM module for making practise?
    Please let me know, once I get your reply I can decide if buying it.
    Thanks in advance
    Alex

    • Raj says:
      October 26, 2010 at 10:50 PM
      Reply

      Hi

      There are approcximately 120 modules included in ECC 6.0 SR3. So that ECC installation will help you to practice your Plant maintenance module. Please get back to me if you are interested. I will tell you the price.

      Wating for your reply

      Thanks
      Raj

  • Pawan says:
    October 19, 2010 at 5:55 PM
    Reply

    Hi Raj,

    I have got IDES SAP ECC 6 SR3 with BI installation cds.

    Is it necessary to have Windows Server 2003 and Oracle 64 bit version, as I am only getting dialogue installation and no ci installation option which installain it on 32 bit version.

    Will appreciate your inputs.

    Pawan

  • Ajay says:
    October 13, 2010 at 1:42 AM
    Reply

    Hi Raj,

    My bad luck!!! My computer crashed. I was using a desktop computer that I want to build as my “SAP Server” and it is not powering up. Also, I can confirm this once i get my computer back on, but I believe I do have Sol Man key, what I don’t have is the SAP certificate, that needs to be used after SAP has been installed. Let me get back to you, but do you need to have SAP certificate to run even IDES? Not sure if I’m even asking the right question.

    Thanks
    Ajay

  • Raj says:
    October 12, 2010 at 7:42 PM
    Reply

    Hi Raj,

    Please write me at rgaur@hotmail.com. I need to get ECC 6.0 as well as BI 7.0 DVD’s.

    I’d prefer a Linux platform but Win 2003 would also do. I already have a Linux platform installed with me but if your DVD’s only work with Win 2003, I’d need an OS DVD too.

    Regards,
    Raj.

  • Andrew says:
    October 11, 2010 at 2:29 PM
    Reply

    Hi! I’m interested in a virtual machine with installed SAP IDES. Can you provide it?

  • Andrew says:
    October 11, 2010 at 2:25 PM
    Reply

    Hi! I’m interested in a virtual machine with installed SAP IDES. Can you provide it?

    e-mail: karepan@mail.ru

  • VENKAT says:
    October 9, 2010 at 12:38 AM
    Reply

    HI Sir,

    I bought a laptop(DELL) 4 gb RAM & 500 HDD with I5 processor and also windows 7 premium with in built. Can i install ECC6 IDES directly…some of the people saying that it cant install directly we need to install with VM ware cant we install like direct like core2due…

    please give full clarification about this

    VENKAT

    • Raj says:
      October 9, 2010 at 7:58 PM
      Reply

      Hi
      You can install directly on your laptop, but os should be either windows server 2003 or 2008. You have to make dual boot between your windows 7 and windows server 2008 to utilize existing windows 7 operating system. I suggest you to install SAP through VMware. It is very easy to manage your SAP and your normal daily operation with windows 7 OS. Please get back to me if you want to install ECC IDES on VMware.
      Thanks
      Raj

  • Raji says:
    October 6, 2010 at 3:46 PM
    Reply

    I need a dell laptop configuration for sap hr. Can anyone give information.

  • Angel says:
    October 4, 2010 at 2:49 PM
    Reply

    Hi

    1) I have a PC with configuration of 500 GB HDD,3 GB RAM.
    2) i do also have external harddisk of 1TB.
    3) which is better to install SAP-in external hard disk or in the system?
    4) coz i too heard of experiences from people telling not to use internet when iam using /practicing SAP ,Iam not sure how it affects.

    please do mail me or clear the above querries

    thanks in advance
    Angel

    • Raj says:
      October 6, 2010 at 2:05 PM
      Reply

      Hi

      Installing SAP on external drive is slower performance than installing in internal drive. I suggest to install in internal drive only. There is no option to install in internal drives in certain cases like preloaded windows vista or 7 laptops. In this case you can install sap ecc or other netweaver components through any virtual machine (Virtual PC or VMware).

      Thanks
      Raj

  • Ashu says:
    October 2, 2010 at 12:45 AM
    Reply

    Hi Raj,
    Thanks for all the suggestions u r giving about sap…,
    i have a small query,i have 500 GB HDD, can you tell me how to do partions, that means what size of partions will be good for SAP Installation, (*server 2003 and SAP IDES ECC 6.0 should be installed in one drive only)…..,

    Thanks
    Ashu.

    • Raj says:
      October 3, 2010 at 7:33 AM
      Reply

      Hi

      500 GB can be devided into C: 30 GB D: 300 GB and Remaining E: Drive
      Install OS in CD Drive, Install SAP in D: Drive and keep software in E: Drive

      Thanks
      Raj

  • sanam says:
    October 1, 2010 at 7:55 PM
    Reply

    hi raj
    i need installation dvd’s of sap ides ecc 6.0 sr2 …what is the cost for the same
    sanamsuri369@yahoo.com

    regards

  • Shazad says:
    October 1, 2010 at 11:50 AM
    Reply

    sorry for typing errors in my last post. It should read as follows.
    I need to install ECC6 SR3 on laptop having Windows 7 ( 64 bits). If I install VMware then do I need “VMware server” OR “VMware Workstation” ? VMware Server is free and VMware Workstation cost a lot ($189 ). If any of both will work, then is there any advantage of VMware Workstation over VMware server ? Can I get your email address please ?

    • Raj says:
      October 3, 2010 at 7:43 AM
      Reply

      Hi

      I think VMware Server is not free. To install VMware workstation you should have host operating system (Ex: XP, Vista) installed on your desktop or laptop but not required for VMware server. Please read about VMware server and get back to me for further discussion about SAP ECC 6 SR3.

      Thanks
      Raj

  • Shazad says:
    October 1, 2010 at 11:47 AM
    Reply

    I need to install ECC6 SR3 on laptop having Windows 7 ( 64 bits). If I install VMware then do I need “Mware server” OR “VMware Workstation” ? VMware Server is free and WMware Workstation cost a lot ($189 ). If any of both will work, then is there any advantage of VMware Workstation over VMware server ? Can I get your email addre

  • Haribabu.M says:
    October 1, 2010 at 11:08 AM
    Reply

    is i5/i7 intel processor, windows-7 works for SAP ECC 6.0 (HR Module)??

    If so how much you charge for dvds and installation.

    I am planning to buy a laptop tommorrow or day after, but one of my friend told that its not compatable.

    Please help me with immediate reply.

    • Raj says:
      October 3, 2010 at 7:46 AM
      Reply

      Hi

      It is compatible, you have to use related SAP version to install it. i3/i7 processors are 64 bit compatible. So that you need to install 64 bit version of SAP ECC 6.0 SR3 on your computer or laptop.

      Thanks
      Raj
      Raj

  • soumya says:
    September 28, 2010 at 12:49 PM
    Reply

    u all r speaking about windows server 2003….what if i have windows 7 ,,, and i want to install sap software it my laptop… guide me raj pls…

    • Raj says:
      September 28, 2010 at 11:50 PM
      Reply

      Hi Soumya, You can not install SAP software directly on windows 7, instead you can install through VMware. Installation through VMware will is better option for the people who doesn’t want to loose the original preloaded os in laptops. So i suggest you to get the VMware software, ECC and windows server 2003 to install your sap software for practice.

      Thanks
      Raj

  • SJ says:
    September 25, 2010 at 2:13 AM
    Reply

    Can I have your email address. I need a cost estimation for my requirement.my id is mailsaphr@yahoo.com
    Thanks

  • SJ says:
    September 25, 2010 at 12:57 AM
    Reply

    Can I have your email address. I need a cost estimation for my requirement.
    Thanks

  • Divya says:
    September 21, 2010 at 4:20 PM
    Reply

    Hi Raj,
    Are you the same Raj from Bangalore? I have purchased CRM 2007 2 years back from you. Now I want to update to CRM 7.0. I have already sent the request to your email (es_aye_pe@yahoo.com). Please respond with the price for restore dvds and pre configured harddisk.

    Regards,
    Divya

  • Anish Grover says:
    September 20, 2010 at 6:31 PM
    Reply

    Hi Raj, I am a fresher in SAP – ABAP from Pune, still doing my course. I wish to install ECC6.0 for practising and my instructor told me to get BI 7 if possible to later practice. Can I get these (in DVDs with your installation support) and if yes how much will it cost. I am residing in Pune. Please email me at anishabap4@gmail.com.Would appreciate if you can provide me any discount as I am still studying.Thanks in advance.

  • nagarjuna says:
    September 20, 2010 at 12:58 PM
    Reply

    hi,
    while installing a sap in our system,we do install ecc by including abap and java.what exactly ecc consists of?
    what is sap netweaver portal?

    • Raj says:
      September 21, 2010 at 12:07 AM
      Reply

      ECC consists of ABAP, BASIS, BI (Not Full), HR, Applications. ECC can be installed both ABAP and JAVA stack if you want. For ECC there is no need to select JAVA after selecting Central Services Instance.
      ABAP + BASIS + BI = Netweaver
      If you add JAVA stack it will become Netviewer.

      Thanks
      Raj

  • Anil says:
    September 17, 2010 at 4:49 PM
    Reply

    Hi,
    I’m in need of ECC 6.0 DVDs and the screen-shots how to install guide.
    please updated me with the latest price my mail id-anilkumarbarik@aol.in.
    If you are in Pune or Mumbai pls let me know.

  • pradeep kumar says:
    September 16, 2010 at 5:56 PM
    Reply

    hello
    is that we can run sap on loading it in external hard disk.i have system of configuration 3gb ram and 320gb hard disk.in my system i have esata port.but i want to load sap-abap module on external hard disk.by sata port we can run run sap faster ion my system?

    • Raj says:
      September 16, 2010 at 11:34 PM
      Reply

      Hi

      Loading SAP in external drive is possible but is very slow to work and operate. You connect HDD to SATA port if you have desktop and install to get better performance of the SAP system. 320 GB is sufficient for SAP ECC 6.0. You can make partitions like C: 20GB, D: 220GB and remaining for E: Drive to store dump.

      Thanks
      Raj

  • uday says:
    September 15, 2010 at 4:36 PM
    Reply

    Raj
    You are Real Guru, guiding all freely all upgrade their knowledge.
    Regards to You

    uday

  • jim says:
    September 14, 2010 at 7:19 AM
    Reply

    i want to correspond with you via email. what is your email address?

  • srini says:
    September 13, 2010 at 3:54 AM
    Reply

    Hi you can instal SAP on Linux aslo, on win xp as well but SAP not recommended on win xp.if you any doughts pls ping me on callksr@gmail.com

  • srini says:
    September 13, 2010 at 3:51 AM
    Reply

    Hi sreeram IDES and non IDES version, IDES contains demo database, no ides contains not data(in comapny company related data). if any one wants any software installation i will do remotely . pls ping me me on callksr@gmail.com
    regards,
    srini

  • SREERAM says:
    September 9, 2010 at 8:48 AM
    Reply

    hi any pls help

    i have one dote in sap

    What is means IDISK, NON IDISK in Sap installaton time

    Sreeram
    09347089093

  • Santosh ojha says:
    August 19, 2010 at 10:15 AM
    Reply

    hi raj,

    Can I install sap ECC 6.0 Netweaver on windows 7 Home Edition OR Linux(ubuntu-9.04-server).

    Thanks

  • Santosh ojha says:
    August 18, 2010 at 9:59 AM
    Reply

    hi raj,

    Can we install sap ECC 6.0 Netweaver on windows XP

    Thanks

  • Santosh says:
    August 17, 2010 at 11:00 AM
    Reply

    hi raj,
    Tell me sap ECC 6.0 SR2 Netweaver INSTALLATION DVD price with discount on my email address ojha.santoshk@gmail.com.

    Thanks

  • Sameer says:
    August 9, 2010 at 7:16 PM
    Reply

    Can you please tell me the price for ECC 6.0 and BI 7.0 IDES DVDs?

  • PhantomRock says:
    August 4, 2010 at 10:10 AM
    Reply

    Hi Raj,
    I’ve sent my real name through email along with my contact details. Please callback.
    Thanks!

  • Vinay says:
    August 2, 2010 at 5:38 PM
    Reply

    Hi Raj this is Vinay, I am from Gurgaon (HR). I have desktop with 320 gb Harddisk, and 1.5 gb Ram and Dule to Core Processor .
    I need this software, can you install this for me and please tell me your cost/fee for this installation.
    if you are from Delhi/ncr can i come over there for installation.
    Please reply me through mail
    my email-id is vinay.bhardwaj81@gmail.com
    Thanx

  • kumar says:
    July 28, 2010 at 7:31 AM
    Reply

    hi
    when i instaling sap ecc6 it asking solation manager key ,how to get solaction manager key pls help me
    ip 192.168.1.3
    id SRK
    central instance host srk
    central instance number 00
    host srk

    srk2k10@yahoo.com

    • Raj says:
      July 30, 2010 at 6:46 PM
      Reply

      Hi Use either of following solution manager keys. please get back to me if it not works.

      15ACCA099E or 15ACCA099D

      Thanks
      Raj

  • kumar says:
    July 28, 2010 at 7:30 AM
    Reply

    hi
    when i instaling sap ecc6 it asking solation manager key ,how to get solaction manager key pls help me
    ip 192.168.1.3
    id SRK
    central instance host srk
    central instance number 00
    host srk
    srk2k10@yahoo.com

  • Buyer says:
    July 23, 2010 at 6:41 AM
    Reply

    Raj

    Your prices are way higher than what other people on the net are offering – i found someone offering the SAP IDES at one tenth of what you are charging. Is there something special in your IDES :)

    • Raj says:
      July 26, 2010 at 7:22 AM
      Reply

      Hi

      Support from my side costs you more. I am not forcing any body to buy from me. I am just giving my best support to my blog readers. I will be with them until ECC installs on their machine. The people who takes my help in installation of ECC 6.0 SR2 or SR3 on their laptops or desktops will not disappoint. They always can communicate with me.

      Thanks
      Raj

  • Raj says:
    July 22, 2010 at 3:58 AM
    Reply

    Kuljinder – Can you please post your phone number or email address.

  • Kuljinder says:
    July 20, 2010 at 8:03 PM
    Reply

    Hi Raj,
    Can you please email me the cost for all entire set for SAP IDES 6.0 SR3 – i think 18 DVDs? I need SAP HR mainly. Please let me know via email.
    Thank you
    Kuljinder

  • phani says:
    July 20, 2010 at 7:11 PM
    Reply

    the access key 36687663221261278694 isnt working. Please check.

    • Raj says:
      July 26, 2010 at 7:24 AM
      Reply

      Hi

      The access key may depend on the names you used while installing ECC 6.0 SR2 or SR3. Please provide me with the names like System name, SID and solman key you used while installation of SAP ECC 6.0 SR2, SR3 or 4.7 IDES. I will provide you the access key based on your names.

      Thanks
      Raj

  • Raj says:
    July 20, 2010 at 12:19 AM
    Reply

    Raj

    I am fresher in SAP and want to learn SAP. I read your postings that you are offering discounted prices and willing to accommodate people who are freshers like me. Can you tell me your discounted price for the SAP DVD’s. I believe I saw in your posting that you recommend 8 GB of RAM but can windows 2003 server support more than 4 gb ram?

    Thanks
    Raj

  • Vikas says:
    July 14, 2010 at 11:42 AM
    Reply

    What is the cost to get SAP IDES 6.0 SR3 – 18 DVDs? And your contact details?
    Thanks
    Vikas

  • A Kumar says:
    July 14, 2010 at 10:41 AM
    Reply

    Hi Raj,
    I tried to contact u on 9390002368. It does not
    exist. I need ECC 6.0. I m from Bangalore, is it possible
    to contact u. My e-mail is akglko@rediffmail.com.

    A Kumar

    • Raj says:
      July 14, 2010 at 8:33 PM
      Reply

      Hi

      Sorry for inconvenience. My number is changed to 9347470810. I have to update this number in some of my articles. I will do as soon as possible. Please try to contact above number for any questions regarding SAP installations.

      Thanks
      Raj

  • By Mahendra says:
    July 13, 2010 at 10:04 AM
    Reply

    I Need Access Key for SAP(ECC 6.0)- could u help us….Bcoz iam facing this problem since 3 months…..

    • Raj says:
      July 13, 2010 at 10:24 AM
      Reply

      Hi

      Please try with following SAP Access Key and leave a comment here whether it worked or not.

      36687663221261278694

      Thanks
      Raj

  • By Ravi says:
    July 13, 2010 at 10:03 AM
    Reply

    I Need Access Key for SAP(ECC 6.0)- could u help us….

  • Ravi says:
    July 8, 2010 at 8:30 AM
    Reply

    Does the windows server 2003 that you install is a genuine version ? If not genuine, will that not be a problem in US when connected to internet ?

    • Raj says:
      July 8, 2010 at 8:39 AM
      Reply

      Hi

      I suggest to use genuine versions always, I will install only when you buy genuine winsows only. Please inform me if you are interested to buy a genuine version of windows server 2003. I will send a best price offer. Then you can buy online.

      Thanks
      Raj

  • nishith maliwal says:
    June 28, 2010 at 4:54 PM
    Reply

    sir please guide me
    can i install sap software in portable hard disk. and when connect in my PC sap software work.
    how much cost & time to install sap in my PC.

  • Vikram says:
    June 24, 2010 at 10:01 AM
    Reply

    I want to install ECC 6.0 on my laptop
    Confg is i5 processor, 3 GB DDR3 Ram, 320 GB Hard disk.

    Where i can meet u, so that u can do the installation personally. Installation thru DVDs or my laptop control thru remote is not preferable for me.

    Wt is your contact no.

    Pls send me the details along with latest price with best discount on my email.

    Waiting for your prompt reply

  • charles says:
    June 15, 2010 at 2:26 PM
    Reply

    Hi,

    I am intersted in learning and installing SAP ECC 6.0, are you still offering the CD’s.

    Please contact me at char910@gmail.com with more details.

    Thanks

    Nitin
    +91 9841811113

  • ajay says:
    June 12, 2010 at 6:35 PM
    Reply

    i need sap ecc 6.0 and other components which are needed to practice MM who got the lowest price

  • rampandey says:
    June 6, 2010 at 6:52 PM
    Reply

    hi all,
    anybody want ECC business suite components, let us know.

    WE will give good concession on all componenets for the software and installation steps.

    Thanks
    Ram

  • Madhu sudan. T says:
    June 4, 2010 at 5:52 PM
    Reply

    i am planning to install SAP ECC 6.0 vesion in my PC. i collect the software also.

    please tell me instalation procedure.

    thank you.

    • Raj says:
      June 4, 2010 at 6:58 PM
      Reply

      Hi

      I will install SAP ECC any version just for $100. Please contact me through my mail punarvasi@gmail.com for more information regarding payment or other details. I will install on your PC with your software whenever you required. You can watch the installation while I do. So you also can learn how to install SAP ECC software. I also install software like BW, BI, XI, CRM, SRM, SCM, EP, NW…etc online. You should have the proper configuration required to install these softwares along with the software DVDs. I will finish the installation in maximum 24 hours time.

      Thanks
      raj

  • Nripen says:
    May 27, 2010 at 4:55 PM
    Reply

    how install solution manager 4.0 sap and configure
    what is the price?
    pl help me

  • Nripen says:
    May 27, 2010 at 4:54 PM
    Reply

    how install solution manager 4.0 sap
    pl help me

  • rob says:
    May 26, 2010 at 4:14 PM
    Reply

    Hi Raj

    Im currently in hyderabad and would like to purchase your software do you do installation?? please call me on 8971194846.

    thanks

    rob

  • Vijay says:
    May 25, 2010 at 4:23 PM
    Reply

    Hi,
    Pls tell me the Price for Ecc 6.0 with BI 7.0

  • kunle says:
    May 24, 2010 at 1:44 AM
    Reply

    Hello Raj,

    Kindly email me with the discount you can give on the 10 DVD’s, I would really appreciate this. My email is azeezdknl@yahoo.com. I look forward to hearing from you.

    Thanks

  • Eid Haddad says:
    May 19, 2010 at 2:25 AM
    Reply

    Hi,

    I am from Brazil and I would like know if you send/delivery these DVD’s for my home, here in Brazil and how many cost for shiping?

    Sorry for my bad english.

    Eid Haddad

  • Aamir says:
    May 8, 2010 at 1:59 PM
    Reply

    Dear Everyone,

    I am Oracle DBA now i want to sap site. I installed SAP ecc6 IDES sr2 in windows 2003 successfully.
    I connected it with gui 7 and all modules in front of me.
    But I confused that what I will do next.
    I want to go technical site not functional.
    I also can do Programming because I have done development in Oracle Developer form. I developed GL, Store Stock system, Payroll, sale purchase intigrated modules.
    So please guide me I will go to installation site or ABAP development site.

    Aamir

  • Usman says:
    May 4, 2010 at 3:28 PM
    Reply

    Hi Raj!
    Can you tell me which version of ECC 6 you have? i mean its EP1, 2 or EP4. can i work with IS in this IDES

    Thanks
    Usman

  • Stuart Wilson says:
    April 28, 2010 at 11:02 AM
    Reply

    Hi Raj,

    I’m interested in buying SAP IDES ECC 6.0 & BI 7.0. can u provide me your contact details for conversation as I have a question about the kernel and patch level?.

  • Suresh says:
    April 24, 2010 at 4:33 PM
    Reply

    Hi Raj,

    can you please send me an offer for an ECC6,BI and Solution manager installation DVD’s and i also want to know can i install all of them on one machine? what is the configration do i require and do you provide screenshots to install all these software on single machine.please give me some discount as i want to buy all 3 of them.I live in sydney, if i get them in post customs wont be problem for me ?Your response is highly appareciated to the email vsuresh008@yahoo.com
    Thanks

  • Geor says:
    April 3, 2010 at 12:39 PM
    Reply

    Does the ECC 6.0 and BI 7.0 IDESs be installed on Windows server 2008? Please send the installation screen shot. Thank you

    Geor

    • Raj says:
      April 5, 2010 at 9:47 PM
      Reply

      You can install but you need to have more processor speed, RAM and disk space in your computer to run both the software ECC 6.0 and BI 7.0. I can not provide screen shots for BI 7.0. I can install online both softwares on your desktop or laptop if you are ready with hardware. My service charge to acomplish this task is $100. Please write a mail to me if you are interested. My mail address is punarvasi@gmail.com

      Thanks
      Raj

  • Geor says:
    April 3, 2010 at 12:19 PM
    Reply

    Raj,

    I have Ecc 6.0 sr2 and bi 7.0 in IDES forms.Can I install them on Windows Server 2008? Is it possible to have the screen shots for installation? My Email id is: gkquarra@gmail.com.
    Do you have SCM APO SNP or DP. Thank you

    Geor

  • rob says:
    March 29, 2010 at 1:45 PM
    Reply

    Dear Raj,

    Can you run Business Objects (BO) in conjunction with the
    BI 7 /SEM 6 , SAP ECC 6.0 Enhancement Package 4?? Do you have all the software on disks?? what hardware specifications do you need to run these in conjunction with each other?? ie ram (ddr3) (amount), HDD (space), external hd size etc. Do you have contact in Bangalore??

    cheers

    rob

  • ramon parra says:
    March 27, 2010 at 2:48 AM
    Reply

    Hi
    Please send a mail to me with your requirement of ides. My mail address is reparra@gmail.com
    Thanks
    moncho

    • Raj says:
      March 28, 2010 at 4:04 PM
      Reply

      Requirements to install ides are

      320 GB Hard Disk, 2 GB RAM, Pentium IV or above processor, Server 2003 Operating System. Installation Screen Shots and Installation DVDs.

      Thanks
      Raj

  • Adrian says:
    March 26, 2010 at 11:17 AM
    Reply

    hi Raj,

    Do you ship to Singapore? If yes, what will be total costs?

    Adrian.

  • Reggie says:
    March 22, 2010 at 10:19 PM
    Reply

    Raj,

    Can you supply me with a Solution Manager Install jey for ECC6.0 ?… Let me know

    -Reggie.

  • Steve says:
    March 9, 2010 at 5:52 AM
    Reply

    Hi,

    Do you have APO (SCM) available?

    Thanks,

    Steve

  • jack says:
    February 25, 2010 at 10:30 PM
    Reply

    SAP ecc 6.0 ides installation screen shots with 10 DVDs

  • Niranjan D. Babras says:
    February 24, 2010 at 9:31 PM
    Reply

    Sir,
    I have to install SAP ECC 6.0 on my pc. As well as i require for DVD’s of ECC 6.0 S/w. Kindly advice me on my cell 9762635585

    Rgds
    Niranjan
    niranjan_babras@rediffmail.com

  • ramon says:
    February 23, 2010 at 10:27 PM
    Reply

    Hi Raj,
    Previously I had purchased this product which is for desktop pc..

    do you know if I can install this also on laptops ?
    Can you suggest me please ?

  • Andrew says:
    February 22, 2010 at 5:06 PM
    Reply

    Hi All, Raj
    I have an ecc6 system and the license will expire shortly.
    The slicense deatils are:
    Active Hardware Key M1710713913
    Installation Number INITIAL
    License Expires On 08.03.2010
    System Number System No. Empty
    Intalled license
    SID Hardware key Validity InstNo.
    DM0 TEMPLICENSE 08.03.2010 INITIAL

    Is it possible to find a new license key?

    Thanks Andrew.

    • Raj says:
      February 23, 2010 at 9:53 AM
      Reply

      Hi
      There is no full license for Demo products. You can try by changing system time to previous date. We used to install SAP by putting date as advance and ring back to original date after completion of installation. In your case only possibility is that to bring system date bak. Please try and and ask if it is not worked.

      Thanks
      Raj

  • nanda says:
    February 18, 2010 at 11:42 PM
    Reply

    can i install windows server on a dell studio laptop. so that i need to install sap on it

    please suggest me

    Nanda

    • Raj says:
      February 21, 2010 at 11:54 AM
      Reply

      Yes you can install windows server 2003 to install ECC 6.0 on your dell laptop, but you need to make recovery DVDs of your laptop for later restore. After installation of Windows server 2003 you can install windows vista or windows xp as second operating systems for other application use. You can use server 2003 for SAP practice. You also can try installation ECC 6.0 on Virtual machine using VMware ot Virtual PC software. Ask me any more questions.

      Thanks
      Raj

    • Raj says:
      February 22, 2010 at 12:49 PM
      Reply

      Yes you can install as second operating system. You install windows vista after installation of server 2003 as dual boot.

      Thanks
      Raj

  • Arpit Jain says:
    February 17, 2010 at 3:04 PM
    Reply

    I need to install SAP IDES ECC 6.0. can u provide me your contact details for conversation.

    • Raj says:
      February 21, 2010 at 11:57 AM
      Reply

      Hi

      You can communicate with me in this blog. So that information will be passed to my blog readers for eay understanding of installation of SAP ECC 6.0 SR2 for practice purpose to job hunters in SAP field. Anyway i am not using any mobile phone now.

      Thanks
      Raj

  • Marc says:
    February 17, 2010 at 3:12 AM
    Reply

    Hi Raj,

    I want to buy the ECC6.0. Can you tell me how much time it will take to get the cd’s in the Netherlands? Do you need database software?

    regards,

    Marc

    • Raj says:
      February 21, 2010 at 12:00 PM
      Reply

      Hi

      I can’t tell about particular country. But packet will reach most of the countries in the world from india should receive in maximum 10 working days.

      Thanks
      Raj

  • Shahzad says:
    February 16, 2010 at 2:47 PM
    Reply

    Hi Raj,

    Please tell me the recession price of this kit and tell me where are you located. I may ask to any of my friend in your city or any near by city to pick this up from you and pay you cash.

    Thanks

  • ismail khan says:
    February 9, 2010 at 7:24 PM
    Reply

    hi raj
    i want to install SAP ECC6.0 WITH ALL MODULES LIKE FICO MM SD ETC ON my pc (2GB RAM 500 GB HDD INTEL ATOM BOARD CPU) IS IT POSSIBLE ?
    I ASKED ABOUT SAP IDES ECC6.0 BEFORE THREE FOUR MONTH AGO BY THAT TIME I AM working as fico functional consultant AND HAS NO TIME TO DO THIS now a days i am free because of no job please send me all detail again on my mail id mikhan60@yahoo.co.in with price and discount
    thanks

  • suresh says:
    February 9, 2010 at 9:07 AM
    Reply

    Hello Raj,
    I am interested in buying this kit.i live in sydney, i was wondering how many days it gonna take to come here the kit and also how much are the postal charges.your response to my email skvennu2009@gmail.com is much appreciated.

    Thanks
    Suresh

  • anwar says:
    January 29, 2010 at 12:39 AM
    Reply

    hi i’m really intersted to buy the software as soon as possibe so please contact me in anoory.sap@gmail.com

  • anwar says:
    January 29, 2010 at 12:33 AM
    Reply

    hi Raj ,

    i want to buy this cd’s but i have a question about the database is it oracle or ms-sql .

    so i wanted in oracle db could contact me via email as soon as possible .

  • Ganapathi says:
    January 19, 2010 at 6:46 PM
    Reply

    Hi Raj,

    I am seeing that, you need “windows server 2003″ to be installed for installing SAP ECC 6.0. But I am afraid, as most of the recent laptops do not support old (xP or before) drivers.

    So please suggest me, which company, which model should I buy for this.

    ganapathi
    9482190704.

    • Raj says:
      January 20, 2010 at 2:36 AM
      Reply

      Hi ganapathi

      Any laptop will come with windows vista or 7 operating system. You can install Windows server 2003 in these laptops by changing SATA options in BIOS. You also can try install server 2003 in a virtual machine ( Windows virtual PC or vmware). In this case you will not loose your original os which will come along with a laptop.

      I preferred mostly DELL laptops. So select the good model with the minimum configuration of 4GB RAM and 500 GB HDD. Processor may be more than dual core. Dell studio 15 (S541019IN8) is looking suitable for installing SAP. You also can try other brands like lenovo or HP laptops.

      Thanks
      Raj

  • Srinivas says:
    January 18, 2010 at 7:30 AM
    Reply

    Hi Raj,

    I am intersted in the SAP ECC 6.0 IDES disk as I am learning SAP BI and I need an environment to practise. Does the installation have SAP ECC and BI? Can you please let me know if you are still offering the DVD’s, how much the dvds cost and what is included.

    Thanks,
    Srinivas

    • Raj says:
      January 19, 2010 at 7:25 AM
      Reply

      Hi

      BI and IDES will come separately. You need to have both the softwares to practice BI. IDES is 10 DVDS and BI is 3 DVDs. You have to install softwares in separate systems. You also can install in single computer in virtual machines or on Vmware clients. If you are interested i can offer both the softwares to setup an environment where you can practice BI.

      Thanks
      Raj

  • Anil says:
    January 17, 2010 at 4:48 AM
    Reply

    Plz send details for SAP Business Suite7.0, SAP Banking Analyzer, BI-BO and BI-BPC7. Need software with installation screenshots and installed Hard drives. Thanks, Anil.

  • Ranj says:
    January 14, 2010 at 10:38 AM
    Reply

    Hello Raj,

    Still got some questions will IDES ECC 6 run on Windows 2003 also with IDES you provide can use Oracle DB, as I would like to run my ECC6 on Oracle backend.

    Thanks.

  • Ranj says:
    January 6, 2010 at 10:10 AM
    Reply

    Hello Raj,

    Thanks for the reply, that is what I have found out from someone else who suggests I set up a virtual machine to separate solution manager. One more question, Will IDES only run on Windows 2003, can it run on Windows 2008 or is there a problem with the PAM for Oracle 10G, I read somewhere Oracle 10G for SAP will only run on Win2003. Also If I need to call you to discuss prices where is your number based which country are you in.

    Thanks,
    Ranj.

  • Ranj says:
    January 4, 2010 at 3:46 PM
    Reply

    Hello Raj,

    If I install IDES ECC 6.0 , plus other components like BI 7, can I aslo install Solution Manager on the same machine. 64 bit – Windows 2003.

    Thanks,
    Ranj.

    • Raj says:
      January 6, 2010 at 1:51 AM
      Reply

      Hi

      You can install all the softwares like ECC 6.0, Solution Manager and BI 7 on same machine. My suggestion is not to install all on single system. Basically any SAP software need more resources like RAM, Hard Disk and processor. So that better allocate one system for each software and configure all in LAN to use all the software components.

      Thanks
      Raj

  • Sahil says:
    January 3, 2010 at 7:43 AM
    Reply

    Hi
    I have installed SAP along with developer key. But when I try to change any configuration under spro it asks me to enter the access key.

    Can you please help me with this?

    thanks
    shyguycalif AT g m a i l . c o m

  • santosh says:
    December 25, 2009 at 4:26 PM
    Reply

    Hi Raj,

    I have 4 GB RAM and 500 GB Hard disk with windows 7 premium on it. Iam planning to use an External Hard disk of500gb to install IDES ECC 6.0 + BI 7.0 on it. Could you let me know the price and other details.

    Thanks,
    Santosh

  • Atul says:
    December 22, 2009 at 12:52 PM
    Reply

    Hi Raj,

    Just wanted to know if i can get SAP ECC and BI Solman keys for same system?

    Atul

  • ram says:
    December 21, 2009 at 7:15 AM
    Reply

    Hi

    i want to install ECC6 ON VM Ware,when i giving JAVA paths it should not take and getting error can u suggest me pls.

    Thanks
    Ram

    • Raj says:
      December 22, 2009 at 10:46 AM
      Reply

      Hi

      Please be clear about the question. Where are you giving java paths? Environmental varialbles?. I will help you if you can give me access to your screen. I can understand your problem in betterway.

      Thanks
      Raj

  • Atul says:
    December 18, 2009 at 1:06 PM
    Reply

    Is there a way for me to get the Soloman key now, before i start any installation ?

  • Atul says:
    December 17, 2009 at 12:51 PM
    Reply

    I got SAP ECC and BI installation CD. I created a VM with windows server 2003. Can i install ECC and BI on the same server ? Also i have Solman keys with different system/machine names for ECC and BI. How do i manage this to work with one VM ?

    • Raj says:
      December 17, 2009 at 1:26 PM
      Reply

      Hi

      If you have different solman keys for ECC and BI, you cant install on single VM ware. You should have same systems name to install both the software in single system.

      Thanks
      Raj

  • Jitender Sharma says:
    December 15, 2009 at 7:22 PM
    Reply

    Hi Raj,
    How long does it work, 1 month or 3 months or ofr ever? Because I heard that these installations do not have SAP License key and thereofre expire after few months/1 month and needs to be reinstalled?
    thanks,
    jitender

    • Raj says:
      December 16, 2009 at 7:21 AM
      Reply

      Hi Jitender Sharma

      To avoid the expiring of license of SAP server for practice make your computer date to forward and bring back to the original date after completion of the installation. So this method will help you keep the server available for n number of years depends upon how much forward you keep the system date before starting ecc installation.

      Thanks
      Raj

  • RAM says:
    December 13, 2009 at 9:50 AM
    Reply

    Dell Studio 15, Intel® Core™ 2 Duo T6600, 2.20GHz, 15.6″ WLED Display, 4GB RAM, 500GB, 8X Slot Load Super Multi (DL DVD+/-R Drive + RAM support), Intel Graphics Media Accelerator 4500MHD, 802.11a/b/g/N, Integrated 2.0M Pixel Webcam, Windows 7 Home Premium.
    and 64-bit processor.

    with aboove configuration can i install SAP ECC6.0.

    • Raj says:
      December 13, 2009 at 11:08 AM
      Reply

      Ram!

      The configuration you mentioned is very good for SAP Installation and can be installed quickly. the operating system you have on the mentioned laptop is windows 7 home premium is not supported to run oracle and sap. You should have windows server 2003 operating systems to get ecc 6.0 installed on your laptop. After installation of SAP you can install windows 7 as second operating system as dual boot.

      You also can try to install Windows Server 2003 in virtual machine and can be installed SAP on that with out loosing your original operating system which came along with laptop.

      Ask me further questions regarding the Installation issues.

      Thanks
      Raj

  • ARUN says:
    December 2, 2009 at 9:06 AM
    Reply

    HI RAJ,I HAVE A DELL STUDIO 14 LAPTOP WITH 64BIT PROCESSOR,4GBRAM,500GB HD,WINDOWS 7 PROFESSIONAL WITH WINDOWS XP MODE RUNNING VIRTUALY ON IT.CAN I INSTALL IDES ECC 6.0 ON THE WIN XP WHICH IS VIRTUAL IN IT AND IS IT INTEGRATED WITH BI COZ IM PLANNING TO LEARN THAT AS WELL KINDLY SUGEST WITH A DISCOUNT AND I WOULD ALSO LIKE TO COME IN PERSON AND GET IT FROM U ,IM IN CHENNAI.

    • Raj says:
      December 2, 2009 at 1:22 PM
      Reply

      Yes every thing about hardware is good enough. but you need to have windows server 2003 to install ECC 6.0 or BI. You please create another virtual machine and install windows server 2003 and proceed with the installation of ECC 6.0 SR2 with my software. Please ask me any further questions.

      Thanks
      Raj

  • Hai says:
    December 1, 2009 at 10:02 PM
    Reply

    I am in Mumbai looking for sap server access on monthly rent basis. what is the monthly charge so i can access remote via internet.

    • Raj says:
      December 2, 2009 at 3:40 AM
      Reply

      Hi

      I don’t have any server configure for this purpose. Better you take the software and install on your own computer. It is cheaper than remote access.

      Thanks
      Raj

  • Hai says:
    November 25, 2009 at 2:21 PM
    Reply

    looking for Ecc6.0

  • Nitin says:
    November 16, 2009 at 5:49 PM
    Reply

    Hi,

    I am intersted in learning and installing SAP ECC 6.0, are you still offering the CD’s.

    Please contact me at nitin08902@yahoo.com with more details.

    Thanks

    Nitin
    732-447-4806

    • Raj says:
      November 26, 2009 at 4:19 PM
      Reply

      Hi Nitin

      I can help you in teaching of sap ecc 6.0 installation online. I am also offering CD’s also. Pl reply if you are interested. I will tell you about price.

      Thanks
      Raj

  • Manpreet Brara says:
    November 16, 2009 at 5:05 PM
    Reply

    When you buy the entire cd Collection do I also get GRC suite, solution manager, Bw3.5, BI 7.0,crm,srm etc

    Thanks

    Brara

  • Dennis says:
    October 29, 2009 at 4:29 PM
    Reply

    Hi Raj

    I emailed some questions for you, but you haven’t answered??

    Thanks
    Dennis

  • Sree says:
    October 18, 2009 at 6:40 AM
    Reply

    Do you have it for Linux OS ? SAP EC 6.0 or SAP R/3 4.7

  • Michael says:
    October 16, 2009 at 11:43 PM
    Reply

    Can someone please help me with getting Sap Ides ECC 6.0 ?

  • Tomcsy says:
    October 6, 2009 at 9:14 PM
    Reply

    Hi,

    can you please send me an offer for an ECC6 and BI installation DVD’s.
    tamas.csuka@gmx.net

    Thanks

  • Mo says:
    September 18, 2009 at 9:29 PM
    Reply

    Raj,

    I’m interested in this product/service you are offering. Question – Can the ECC 6.0 be installed on a VMWare which I’m planning on putting on an external HD (1TB in size). If this is do-able, send me an email with the discounted price (mjghalib@hotmail.com).

    Regards,
    Mo

  • sunil says:
    September 17, 2009 at 11:54 AM
    Reply

    hi raj,
    Tell me sap ECC 6.0 SR2 INSTALLATION DVD price with discount on my email address deseymem@yahoo.com .
    thanks

    • Raj says:
      September 17, 2009 at 1:54 PM
      Reply

      Hi Sunil

      I am here to support the people by giving online solutions for learners. So you can freely ask me for an discount. This is a service not a product. I will give you full support. Even i take control of your PC online to install on behalf of you. I am sending you a mail regarding price.

      Thanks
      Raj

  • Karl says:
    September 17, 2009 at 3:03 AM
    Reply

    To Raj,

    I would like to have a solution with ECC 6.0 SR3 with PI and BI. Do you provide installation and configuration of PI ? That is on top of installation of ECC 6.0. Thank you for your help.

    • Raj says:
      September 17, 2009 at 11:05 PM
      Reply

      Yes I can provide, Please tell me what is the configuration of your system or laptop. Inform me where you are you from? I am sending you the price to your email address which is given in this post.

      Thanks
      Raj

  • Nick says:
    September 14, 2009 at 4:35 PM
    Reply

    Hi
    we are interersted in bying a solution – that we can put on our server is that possible with your 10 DVD?
    We would also be interested in APO and SRM and SOLMAN – solution manager – could you give me a price on that
    best regards

    Nick

    • Raj says:
      September 14, 2009 at 6:10 PM
      Reply

      Yes you have to configure server 2003 as required to install SAP ECC 6.0 SR2 on your server. You should use this software for learning purpose only. Others i will give you the price in your email.

      Thanks
      Raj

  • mshajib says:
    September 13, 2009 at 8:48 PM
    Reply

    hi Raj
    thanks for offering discount, but i don’t think should i should ask in the open forum, rather you can mail me on mshajib@yahoo.com
    Do you have any agent/business partner/client is Bangladesh ?
    it is verry deficult to transfer money from bangladesh, also reliability is also a factor.

  • Prem says:
    September 12, 2009 at 11:29 PM
    Reply

    Hi,
    Can I only install the Logistic modules(FICO,MM,SD)and leaving out the rest?

    Thanks,
    Prem

    • Raj says:
      September 13, 2009 at 10:11 AM
      Reply

      Hi

      All modules are integrated, so we can’t install modules separately. We need to start SAP server before using any module. Ask me if you have more questions.

      Thanks
      Raj
      9390002368

  • Eddie MK says:
    September 12, 2009 at 1:13 PM
    Reply

    I need to purchase SAP IDES Ecc 6.0 with installation screenshots and 2003 server,
    how much it will cost, how many days to be delivered, I live in Saudi arabia
    thanks.

    • Raj says:
      September 12, 2009 at 9:21 PM
      Reply

      Hi

      I can give windows server 2003 CD along withe SAP ECC 6.0 DVDs (10 No.s) $210 including shipping. I will send the DVDs through speed post by India Post. Mostly this packet will reach US and UK from India within a weeks time. So that you will also receive in same same time like 1 week to 10 days. My DVD kit will have step-by-step screen shots to install SAP ECC 6.0 on your desktop or laptop. I will explain you about installation from the scratch even from operating system installation. Please contact me if you are interested to buy.

      Thanks
      Raj

      • Tuoyor Oneyor says:
        January 3, 2012 at 3:42 PM
        Reply

        I need to purchase SAP IDES Ecc 6.0 with installation screenshots how much it will cost, how many days to be delivered, I live in Lagos, Nigeria.

    • Raj says:
      September 13, 2009 at 10:14 AM
      Reply

      Hi

      Yes i have seen the link of Ebay. These people are selling the product. I am selling my service i mean to say i give support to you until you get it installed on your pc or laptop. I am going help you while installation. I can do also remote installation if you are unable to do it.

      Any way, you can ask me for discount. How much you are comfortable. I may agree if it is reasonable.

      Thanks
      Raj
      9390002368

  • Vijay says:
    September 9, 2009 at 10:14 AM
    Reply

    Basically I am looking for all the required SAP Software to work on SAP Enterprise Portal Development. I would also need NWDS(Netweaver portal Devopement Studio)..Can you let me know what documents you have and what software you have for SAP EP

    • Raj says:
      September 9, 2009 at 7:10 PM
      Reply

      Hi

      I have the software like SAP ECC 6.0 SR2, SR3, BIW 3.5, BI 7.0, XI, EP, Net Weaver…etc. Tell me which software exactly you need.

      Thanks
      Raj

  • Vijay says:
    September 9, 2009 at 9:14 AM
    Reply

    What is the cost for the software along with OS. I have Win XP on my machine..Can I install ECC on XP or 2003 server is required?

  • Vijay says:
    August 15, 2009 at 8:37 PM
    Reply

    Hi,

    What is the cost to buy sap-ecc-6-0-ides-installation-screen-shots-with-10-dvds

    with regards,
    Vijay.

  • Ravi Kumar VR Garre says:
    August 9, 2009 at 7:03 AM
    Reply

    Hi

    I have a quick query, if we install SAP ECC 6.0 IDES can i work on SAP BI module as well having ECC 6.0 as source system?

    Appreciate your answer.

    Regards,
    Ravi Kumar VR Garre
    +1-647-869-7289

Leave a Comment